Commits (2)
......@@ -112,6 +112,9 @@
* to ensure they only have Synchronet attribute codes.
* 2022-02-19 Eric Oulashin Version 1.44
* Releasing this version.
* 2022-02-24 Eric Oulashin Version 1.45
* Fixed message scanning & searching issue introduced in the
* previous version.
*/
 
 
......@@ -232,8 +235,8 @@ if (system.version_num < 31500)
}
 
// Reader version information
var READER_VERSION = "1.44";
var READER_DATE = "2022-02-19";
var READER_VERSION = "1.45";
var READER_DATE = "2022-02-24";
 
// Keyboard key codes for displaying on the screen
var UP_ARROW = ascii(24);
......@@ -1817,6 +1820,13 @@ function DigDistMsgReader_SearchMessages(pSearchModeStr, pSubBoardCode, pScanSco
var continueScan = true;
var userAborted = false;
this.doingMultiSubBoardScan = (subBoardsToScan.length > 1);
// If the sub-board's access requirements allows the user to read it
// and it's enabled in the user's message scan configuration, then go
// ahead with this sub-board.
// Note: Used to use this to determine whether the user could access the
// sub-board:
//user.compare_ars(msg_area.grp_list[grpIndex].sub_list[subIndex].ars)
// Now using the can_read property.
for (var subCodeIdx = 0; (subCodeIdx < subBoardsToScan.length) && continueScan; ++subCodeIdx)
{
subCode = subBoardsToScan[subCodeIdx];
......@@ -1828,16 +1838,9 @@ function DigDistMsgReader_SearchMessages(pSearchModeStr, pSubBoardCode, pScanSco
// when the "Searching ..." and "No messages were found" text is
// displayed repeatedly
console.line_counter = 0;
// If the sub-board's access requirements allows the user to read it
// and it's enabled in the user's message scan configuration, then go
// ahead with this sub-board.
// Note: Used to use this to determine whether the user could access the
// sub-board:
//user.compare_ars(msg_area.grp_list[grpIndex].sub_list[subIndex].ars)
// Now using the can_read property.
// TODO: It seems ReadOrListSubBoard() does its own loop through
// the sub-boards if the user chooses to go to the next one
var readOrListRetObj = this.ReadOrListSubBoard(subCode, null, true, false, false, false);
// let the user read the sub-board (and toggle betweeen reading and
// listing)
var readOrListRetObj = this.ReadOrListSubBoard(subCode, null, true, true, false, true, READER_MODE_READ);
console.print("\1n");
console.crlf();
//if (this.SearchTypePopulatesSearchResults())
......@@ -1848,6 +1851,7 @@ function DigDistMsgReader_SearchMessages(pSearchModeStr, pSubBoardCode, pScanSco
}
}
this.subBoardCode = subBoardCodeBackup;
console.pause();
}
else
this.ReadOrListSubBoard(subCode);
......@@ -1927,6 +1931,9 @@ function DigDistMsgReader_ClearSearchData()
// pPromptToGoNextIfNoResults: Optional boolean - Whether or not to prompt the user
// to go onto the next/previous sub-board if there are no
// search results in the current sub-board. Defaults to true.
// pInitialModeOverride: Optional (numeric) to override the initial mode in this
// function (READER_MODE_READ or READER_MODE_LIST). If not
// specified, defaults to this.startMode.
//
// Return value: An object with the following properties:
// stoppedReading: Boolean - Whether or not the user stopped reading.
......@@ -1934,7 +1941,8 @@ function DigDistMsgReader_ClearSearchData()
function DigDistMsgReader_ReadOrListSubBoard(pSubBoardCode, pStartingMsgOffset,
pAllowChgArea, pReturnOnNextAreaNav,
pPauseOnNoMsgSrchResults,
pPromptToGoNextIfNoResults)
pPromptToGoNextIfNoResults,
pInitialModeOverride)
{
var retObj = {
stoppedReading: false
......@@ -2002,6 +2010,9 @@ function DigDistMsgReader_ReadOrListSubBoard(pSubBoardCode, pStartingMsgOffset,
// Determine whether to start in list or reader mode, depending
// on the value of this.startMode.
var readerMode = this.startMode;
// If an initial mode override was specified and is valid, then use it.
if (typeof(pInitialModeOverride) === "number" && (pInitialModeOverride == READER_MODE_READ || pInitialModeOverride == READER_MODE_LIST))
readerMode = pInitialModeOverride;
// User input loop
var selectedMessageOffset = 0;
if (typeof(pStartingMsgOffset) == "number")
......@@ -2061,6 +2072,7 @@ function DigDistMsgReader_ReadOrListSubBoard(pSubBoardCode, pStartingMsgOffset,
}
else if (otherRetObj.messageListReturn)
readerMode = READER_MODE_LIST;
break;
case READER_MODE_LIST:
// Note: Doing the message list is also handled in this.ReadMessages().
// This code is here in case the reader is configured to start up
......@@ -2883,7 +2895,6 @@ function DigDistMsgReader_ReadMessages(pSubBoardCode, pStartingMsgOffset, pRetur
{
if (allowChgMsgArea && !pReturnOnNextAreaNav)
{
console.print("\1nHere!!!! \1p"); // Temporary
var goToNextRetval = this.GoToNextSubBoardForEnhReader(allowChgMsgArea, pPromptToGoToNextAreaIfNoSearchResults);
retObj.stoppedReading = goToNextRetval.shouldStopReading;
if (retObj.stoppedReading)
......@@ -3827,16 +3838,6 @@ function DigDistMsgReader_ListMessages_Lightbar(pAllowChgSubBoard)
// S: Sorting options
else if (lastUserInputUpper == "S")
{
if (user.is_sysop) // Temporary
{
console.gotoxy(1, console.screen_rows);
console.cleartoeol("\1n");
console.gotoxy(1, console.screen_rows);
console.print("\1gSort\1n");
mswait(ERROR_PAUSE_WAIT_MS);
}
// Refresh the help line
DisplayHelpLine(this.msgListLightbarModeHelpLine);
}
......@@ -6984,9 +6985,9 @@ function DigDistMsgReader_WriteMsgListScreenTopHeader()
// Figure out the message group name & sub-board name
// For the message group name, we can also use msgbase.cfg.grp_name in
// Synchronet 3.12 and higher.
var msgbase = new MsgBase(this.subBoardCode);
var msgGroupName = msg_area.grp_list[msgbase.cfg.grp_number].description;
var subBoardName = "Unspecified";
var msgbase = new MsgBase(this.subBoardCode);
if (msgbase.open())
{
if (msgbase.cfg != null)
......@@ -10536,13 +10537,13 @@ function DigDistMsgReader_PromptAndDeleteSelectedMessages(pPromptLoc, pClearProm
{
if (promptLocValid)
{
var delMsgsPromptText = replaceAtCodesInStr(this.text.delSelectedMsgsConfirmText);
// If the caller wants to clear the remainder of the row where the prompt
// text will be, then do it.
if (pClearPromptRowAtFirstUse)
{
// Adding 5 to the prompt text to account for the ? and "[X] " that
// will be added when console.noyes() is called
var delMsgsPromptText = replaceAtCodesInStr(this.text.delSelectedMsgsConfirmText);
var promptTxtLen = console.strlen(delMsgsPromptText) + 5;
var numCharsRemaining = 0;
if (typeof(pPromptRowWidth) == "number")
......@@ -10556,8 +10557,8 @@ function DigDistMsgReader_PromptAndDeleteSelectedMessages(pPromptLoc, pClearProm
}
// Move the cursor to the prompt location
console.gotoxy(pPromptLoc);
deleteMsgs = !console.noyes(delMsgsPromptText);
}
deleteMsgs = !console.noyes(delMsgsPromptText);
}
// If we are to delete the messages, then delete it.
if (deleteMsgs)
......
Digital Distortion Message Reader
Version 1.44
Release date: 2022-02-19
Version 1.45
Release date: 2022-02-24
by
......
......@@ -5,6 +5,8 @@ Revision History (change log)
=============================
Version Date Description
------- ---- -----------
1.45 2022-02-24 Fixed message scanning & searching issue introduced in the
previous version.
1.44 2022-02-19 Removed the scanScopePromptText text line and used the
SubGroupOrAll line (621) from text.dat instead. Also, the
reader now supports @-code expansion in configured text
......