Synchronet issueshttps://gitlab.synchro.net/main/sbbs/-/issues2024-03-22T07:20:16Zhttps://gitlab.synchro.net/main/sbbs/-/issues/736scfg doesn't clone access reqauirements2024-03-22T07:20:16ZNigel Reedscfg doesn't clone access reqauirementsI setup a new network with one group having SYSOP as the access requirement. My template group has an empty access requirement.
When I set that group as the default template group and did a clone, it added SYSOP to all the groups after ...I setup a new network with one group having SYSOP as the access requirement. My template group has an empty access requirement.
When I set that group as the default template group and did a clone, it added SYSOP to all the groups after it. Now, I cannot change the access requirement using clone. I have to manually go in and clear out the requirement.Rob SwindellRob Swindellhttps://gitlab.synchro.net/main/sbbs/-/issues/664scfg: add "long name/short name" toggle in door mode.2023-10-23T19:29:09ZNigel Reedscfg: add "long name/short name" toggle in door mode.When running scfg -iD and you go into message sub-boards, only the short name is displayed. There are times I'd like to see the long name list instead. Maybe add "t" to toggle between short and long name display.
Example:
~~~
[AmigaNet ...When running scfg -iD and you go into message sub-boards, only the short name is displayed. There are times I'd like to see the long name list instead. Maybe add "t" to toggle between short and long name display.
Example:
~~~
[AmigaNet Sub-boards (21)]
1: BBSNEWS AMY
2: BBSSOFT AMY
3: COMMS AMY
4: COMS AMY
5: FILE ANNOUNCE AMY
6: HARD AMY
...
~~~
I'd like to see
~~~
Amiganet: BBS Ads
Amiganet: BBS Software Discussions
Amiganet: Comms
Amiganet: Communications Discussions
File Announcements
Amiganet: Hardware Chat
~~~Rob SwindellRob Swindellhttps://gitlab.synchro.net/main/sbbs/-/issues/616scfg: ^v doesn't paste in Transfer Protocols sections2024-03-22T07:20:15ZNigel Reedscfg: ^v doesn't paste in Transfer Protocols sectionsUsing ^C then ^V to copy and paste an entry in the File Options > Transfer Protocols section doesn't work. The same process works fine when cutting & pasting in the file directories area.Using ^C then ^V to copy and paste an entry in the File Options > Transfer Protocols section doesn't work. The same process works fine when cutting & pasting in the file directories area.Rob SwindellRob Swindellhttps://gitlab.synchro.net/main/sbbs/-/issues/349Add prev/next in scfg for file & message sections2022-03-07T01:47:19ZNigel ReedAdd prev/next in scfg for file & message sectionsPer discussion on IRC:
n scfg when you've drilled down to a message area, any change you could add left and right arrow keys to move to the next and previous entry? Rather than hitting escape to go back then cursor down then enter to ge...Per discussion on IRC:
n scfg when you've drilled down to a message area, any change you could add left and right arrow keys to move to the next and previous entry? Rather than hitting escape to go back then cursor down then enter to get to the next. I'm trying to flip through looking for something and that quick nav would help. Same for file areas would be nice.https://gitlab.synchro.net/main/sbbs/-/issues/150Backup (import/export) scfg configurations2022-04-16T05:44:12ZMichael J. RyanBackup (import/export) scfg configurations```
Re: Backup scg configs
By: Rmh to Digital Man on Sun Jul 15 2018 07:05 am
DM>> So what is the current problem, just the slow loading of message
DM>> pointers?
Rm> Yes, that's what I am experiencing and I am not sure if I can...```
Re: Backup scg configs
By: Rmh to Digital Man on Sun Jul 15 2018 07:05 am
DM>> So what is the current problem, just the slow loading of message
DM>> pointers?
Rm> Yes, that's what I am experiencing and I am not sure if I can improve/fix
Rm> that somehow.
Rm> On the other hard, and based on the previous steps I provided to remove
Rm> the messages
>>> I have done the following:
>>> * remove message sub board from scfg
>>> * remove Grouphub identifier from sbbsecho.ini
>>> * Remove anything related from the areas.bbs file
Rm> It doesn't seem to remove everything, I still have the slow Message
Rm> Pointers load on/happening, and it starts complaining:
Rm> 14-07-2018 06:51:29 USENETALALTBEAMO: Unrecognized internal code, assumed
Rm> passthru
Rm> 14-07-2018 06:51:29 USENETALALTBEAVI: Unrecognized internal code, assumed
Rm> passthru
Rm> 14-07-2018 06:51:29 USENETALALTBECKR: Unrecognized internal code, assumed
Rm> passthru
Rm> 14-07-2018 06:51:29 USENETALALTBEDOP: Unrecognized internal code, assumed
Rm> passthru
Rm> 14-07-2018 06:51:29 USENETALALTBEDWE: Unrecognized internal code, assumed
Rm> passthru
Rm> 14-07-2018 06:51:29 USENETALALTBEDWF: Unrecognized internal code, assumed
Rm> passthru
Rm> 14-07-2018 06:51:29 USENETALALTBEDWG: Unrecognized internal code, assumed
Rm> passthru
Rm> 14-07-2018 06:51:29 USENETALALTBEDWH: Unrecognized internal code, assumed
Rm> passthru
Rm> 14-07-2018 06:51:29 USENETALALTBEEKS: Unrecognized internal code, assumed
Rm> passthru
Rm> 14-07-2018 06:51:29 USENETALALTBEENZ: Unrecognized internal code, assumed
Rm> passthru
Rm> 14-07-2018 06:51:29 USENETALALTBEEOT: Unrecognized internal code, assumed
Rm> passthru
Digital Man,
I finally managed to have all sorted.
I had a massive mess between the sub-boards + the areas.bbs file. The amount of
stuff was just massive and I was literally getting lost in translation there.
I just restore an old copy of the areas.bbs file + removed all the sub-boards.
Waited a bit and Now it's all back to Normality. Loading pointers as it should.
It has been an interesting experience to load 2000 + boards. It was just
bringing the Box to it's knees. 1 CPU/Core was all the way up to 100% and I had
setup 10 nodes!!! So I coudn't imagine having jsut 4 simultaneous users!!
I can see the limitation now, anywhow do you see a way of getting all those
many boards and still keeping the service just working all right?
Anyway of users login in without the whole Message Point Loding issue?
Just wondering if there is a way around or I am just asking for an impossible.
Many thanks for all guys.
--->RainManHood<---
---
■ Synchronet ■ UNICYBER BBS -- bbs.unicyber.co.uk:2323::ssh bbs.unicyber.co.uk 2424
```https://gitlab.synchro.net/main/sbbs/-/issues/113max mail waiting limit per security level2020-08-28T23:36:20ZMichael J. Ryanmax mail waiting limit per security levelLimit user mail boxes (max messages) based on security level, zero = infiniteLimit user mail boxes (max messages) based on security level, zero = infinitehttps://gitlab.synchro.net/main/sbbs/-/issues/43close scfg from Windows should prompt for save changes, etc.2021-02-06T06:31:44ZMichael J. Ryanclose scfg from Windows should prompt for save changes, etc.When scfg is running in a window, it's easy for a new sysop to close it with
the window manager, which won't prompt for changes or save changes. :-(
Use the Console Control Handler to call a callback that saves changes, etc.When scfg is running in a window, it's easy for a new sysop to close it with
the window manager, which won't prompt for changes or save changes. :-(
Use the Console Control Handler to call a callback that saves changes, etc.Rob SwindellRob Swindell