echocfg.c

							,cfg.nodecfg[i].comment);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Archive Type"
							,cfg.nodecfg[i].archive ==  SBBSECHO_ARCHIVE_NONE ?
							"None":cfg.nodecfg[i].archive->name);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Packet Type"
							,pktTypeStringList[cfg.nodecfg[i].pkt_type]);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Packet Password"
							,cfg.nodecfg[i].pktpwd);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Session Password"
							,cfg.nodecfg[i].sesspwd);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","TIC File Password"
							,cfg.nodecfg[i].ticpwd);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","AreaFix Support"
							,cfg.nodecfg[i].areafix ? "Yes" : "No");
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","AreaFix Password"
							,cfg.nodecfg[i].password);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","EchoList Keys"
							,strListCombine(cfg.nodecfg[i].keys,str,sizeof(str),","));
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Status"
							,mailStatusStringList[cfg.nodecfg[i].status]);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Direct"
							,cfg.nodecfg[i].direct ? "Yes":"No");
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Passive"
							,cfg.nodecfg[i].passive ? "Yes":"No");
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Send Notify List"
							,cfg.nodecfg[i].send_notify ? "Yes" : "No");
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Uplink for Message Groups"
							,strListCombine(cfg.nodecfg[i].grphub,str,sizeof(str),","));
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Local Address (AKA)"
							,cfg.nodecfg[i].local_addr.zone
							? faddrtoa(&cfg.nodecfg[i].local_addr) : "Best Match");
						if(cfg.flo_mailer) {
							snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Route To"
								,cfg.nodecfg[i].route.zone
								? faddrtoa(&cfg.nodecfg[i].route) : "Disabled");
							if(!faddr_contains_wildcard(&cfg.nodecfg[i].addr)) {
								snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s", "Inbox Directory", cfg.nodecfg[i].inbox);
								snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s", "Outbox Directory", cfg.nodecfg[i].outbox);
								strcpy(opt[j++], "BinkP Settings...");
							}
						}
						opt[j][0]=0;
						SAFEPRINTF(str, "Linked Node - %s"
							,cfg.nodecfg[i].name[0] ? cfg.nodecfg[i].name : faddrtoa(&cfg.nodecfg[i].addr));
						k=uifc.list(WIN_MID|WIN_ACT|WIN_SAV,0,0,0,&nodeop,&nodeopbar,str,opt);
						if(k==-1)
							break;
						switch(k) {
							case __COUNTER__:
	uifc.helpbuf=
	"~ Address ~\n\n"
	"This is the FidoNet style address of this linked node.\n";
								SAFECOPY(str,faddrtoa(&cfg.nodecfg[i].addr));
								if(uifc.input(WIN_MID|WIN_SAV,0,0
									,"Node Address (ALL wildcard allowed)",str
									,25,K_EDIT|K_UPPER)>0)
									cfg.nodecfg[i].addr=atofaddr(str);
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Domain ~\n\n"
	"This is the domain portion of the 5D FTN address of this linked node\n"
	"(e.g. '`fidonet`').  FTN domains are limited to 8 characters and must not\n"
	"contain the characters '@' or '.'";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"Domain"
									,cfg.nodecfg[i].domain, sizeof(cfg.nodecfg[i].domain)-1
									,K_EDIT);
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Name ~\n\n"
	"This is an optional NetMail destination name for the node (e.g. the sysop's name).\n"
	"This is used for AreaFix Notification NetMail messages.\n";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"Name"
									,cfg.nodecfg[i].name,sizeof(cfg.nodecfg[i].name)-1
									,K_EDIT);
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Comment ~\n\n"
	"This is an optional comment for the node (e.g. the sysop's name).\n"
	"This is used for informational purposes only.\n";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"Comment"
									,cfg.nodecfg[i].comment,sizeof(cfg.nodecfg[i].comment)-1
									,K_EDIT);
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Archive Type ~\n\n"
	"This is the archive type that will be used for compressing packets\n"
	"into archive bundles for this node.\n";
								int cur=cfg.arcdefs;
								for(u=0;u<cfg.arcdefs;u++) {
									if(cfg.nodecfg[i].archive == &cfg.arcdef[u])
										cur=u;
									strcpy(opt[u],cfg.arcdef[u].name);
								}
								strcpy(opt[u++],"None");
								opt[u][0]=0;
								k=uifc.list(WIN_RHT|WIN_SAV,0,0,0,&cur,0
									,"Archive Type",opt);
								if(k==-1)
									break;
								if((unsigned)k>=cfg.arcdefs)
									cfg.nodecfg[i].archive = SBBSECHO_ARCHIVE_NONE;
								else
									cfg.nodecfg[i].archive = &cfg.arcdef[k];
								uifc.changes=TRUE;
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Packet Type ~\n\n"
	"This is the packet header type that will be used in mail packets\n"
	"created for this node.  SBBSecho defaults to creating `Type-2+` packets.\n"
	"\n"
	"`Type-2  ` packets are defined in FTS-0001.16 (Stone Age)\n"
	"`Type-2e ` packets are defined in FSC-0039.04 (Sometimes called 2+)\n"
	"`Type-2+ ` packets are defined in FSC-0048.02 (4D address support)\n"
	"`Type-2.2` packets are defined in FSC-0045.01 (5D address support)\n"
	;
								j=cfg.nodecfg[i].pkt_type;
								k=uifc.list(WIN_RHT|WIN_SAV,0,0,0,&j,0,"Packet Type"
									,pktTypeStringList);
								if(k==-1)
									break;
								cfg.nodecfg[i].pkt_type=k;
								uifc.changes=TRUE;
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Packet Password ~\n\n"
	"This is an optional password that SBBSecho will place into packets\n"
	"destined for this node.\n"
	"\n"
	"Packet passwords are `case-insensitive`";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"Packet Password (optional)"
									,cfg.nodecfg[i].pktpwd,sizeof(cfg.nodecfg[i].pktpwd)-1
									,K_EDIT|K_UPPER);
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Session Password ~\n\n"
	"This is an optional password that BinkIT will use for authenticated\n"
	"BinkP sessions with this node.\n"
	"\n"
	"Session passwords are `case-sensitive`";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"Session Password"
									,cfg.nodecfg[i].sesspwd,sizeof(cfg.nodecfg[i].sesspwd)-1
									,K_EDIT);
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ TIC File Password ~\n\n"
	"This is an optional password that tickit.js will use for creating\n"
	"and authenticating `.TIC` files to/from this node.\n";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"TIC File Password (optional)"
									,cfg.nodecfg[i].ticpwd,sizeof(cfg.nodecfg[i].ticpwd)-1
									,K_EDIT|K_UPPER);
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ AreaFix Support ~\n\n"
	"If you wish for this node to be able to remotely query or change their\n"
	"configuration via `AreaFix` NetMail messages, set to option to `Yes`.\n";
								k = cfg.nodecfg[i].areafix;
								switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
									,"AreaFix Support",uifcYesNoOpts)) {
									case 0:	cfg.nodecfg[i].areafix = true;	uifc.changes=TRUE; break;
									case 1:	cfg.nodecfg[i].areafix = false;	uifc.changes=TRUE; break;
								}
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ AreaFix Password ~\n\n"
	"This is the password that will be used by this node when doing remote\n"
	"AreaManager / AreaFix functions.\n";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"AreaFix Password"
									,cfg.nodecfg[i].password,sizeof(cfg.nodecfg[i].password)-1
									,K_EDIT|K_UPPER);
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ EchoList Keys ~\n\n"
	"These are a named-keys to be given to this node allowing access to one\n"
	"or more of the configured `EchoLists` for remote area-add requests.\n";
								while(1) {
									for(j=0; cfg.nodecfg[i].keys!=NULL && cfg.nodecfg[i].keys[j]!=NULL ;j++)
										strcpy(opt[j],cfg.nodecfg[i].keys[j]);
									opt[j][0]=0;
									k=uifc.list(WIN_SAV|WIN_INS|WIN_DEL|WIN_ACT|
										WIN_XTR|WIN_INSACT|WIN_DELACT|WIN_RHT
										,0,0,0,&k,0,"EchoList Keys",opt);
									if(k==-1)
										break;
									if((k&MSK_ON)==MSK_INS) {
										k&=MSK_OFF;
										if(uifc.input(WIN_MID|WIN_SAV,0,0
											,"EchoList Key",str,SBBSECHO_MAX_KEY_LEN
											,K_UPPER)<1)
											continue;
										strListInsert(&cfg.nodecfg[i].keys, str, k);
										uifc.changes=TRUE;
										continue;
									}

									if((k&MSK_ON)==MSK_DEL) {
										k&=MSK_OFF;
										strListRemove(&cfg.nodecfg[i].keys, k);
										uifc.changes=TRUE;
										continue;
									}
									SAFECOPY(str,cfg.nodecfg[i].keys[k]);
									uifc.input(WIN_MID|WIN_SAV,0,0,"EchoList Key"
										,str,SBBSECHO_MAX_KEY_LEN,K_EDIT|K_UPPER);
									strListReplace(cfg.nodecfg[i].keys, k, str);
									uifc.changes=TRUE;
									continue;
								}
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Mail Status ~\n\n"
	"Set the mail status for this node: `Normal`, `Hold`, or `Crash`.\n";
								j=cfg.nodecfg[i].status;
								k=uifc.list(WIN_RHT|WIN_SAV,0,0,0,&j,0,"Mail Status"
									,mailStatusStringList);
								if(k==-1)
									break;
								if(cfg.nodecfg[i].status!=k) {
									cfg.nodecfg[i].status=k;
									uifc.changes=TRUE;
								}
								break;
							case __COUNTER__:
								k = !cfg.nodecfg[i].direct;
								switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
									,"Direct Delivery",uifcYesNoOpts)) {
									case 0:	cfg.nodecfg[i].direct = true;	uifc.changes=TRUE; break;
									case 1:	cfg.nodecfg[i].direct = false;	uifc.changes=TRUE; break;
								}
								break;
							case __COUNTER__:
								k = !cfg.nodecfg[i].passive;
								switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
									,"Passive Node",uifcYesNoOpts)) {
									case 0:	cfg.nodecfg[i].passive = true;	uifc.changes=TRUE; break;
									case 1:	cfg.nodecfg[i].passive = false;	uifc.changes=TRUE; break;
								}
								break;
							case __COUNTER__:
								k = !cfg.nodecfg[i].send_notify;
								switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
									,"Send AreaFix Notifications",uifcYesNoOpts)) {
									case 0:	cfg.nodecfg[i].send_notify = true;	uifc.changes=TRUE; break;
									case 1:	cfg.nodecfg[i].send_notify = false;	uifc.changes=TRUE; break;
								}
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Uplink for Message Groups ~\n\n"
	"These are Message Group short names (as configured in SCFG) for which\n"
	"this linked node is your system's uplink (hub).\n"
	"\n"
	"Use of this setting allows your hub to be automatically linked with new\n"
	"areas when new Sub-boards (within a listed group) are auto-added to the\n"
	"Area File."
	;
								while(1) {
									for(j=0; cfg.nodecfg[i].grphub!=NULL && cfg.nodecfg[i].grphub[j]!=NULL ;j++)
										strcpy(opt[j],cfg.nodecfg[i].grphub[j]);
									opt[j][0]=0;
									k=uifc.list(WIN_SAV|WIN_INS|WIN_DEL|WIN_ACT|
										WIN_XTR|WIN_INSACT|WIN_DELACT|WIN_RHT
										,0,0,0,&k,0,"Uplink for Message Groups",opt);
									if(k==-1)
										break;
									if((k&MSK_ON)==MSK_INS) {
										k&=MSK_OFF;
										if(uifc.input(WIN_MID|WIN_SAV,0,0
											,"Message Group (short name)",str,LEN_GSNAME
											,/* kmode: */0) < 1)
											continue;
										strListInsert(&cfg.nodecfg[i].grphub, str, k);
										uifc.changes=TRUE;
										continue;
									}

									if((k&MSK_ON)==MSK_DEL) {
										k&=MSK_OFF;
										strListRemove(&cfg.nodecfg[i].grphub, k);
										uifc.changes=TRUE;
										continue;
									}
									SAFECOPY(str,cfg.nodecfg[i].grphub[k]);
									uifc.input(WIN_MID|WIN_SAV,0,0,"Message Group (short name)"
										,str,LEN_GSNAME,K_EDIT|K_UPPER);
									strListReplace(cfg.nodecfg[i].grphub, k, str);
									uifc.changes=TRUE;
									continue;
								}
								break;
							case __COUNTER__:
								SAFECOPY(str,faddrtoa(&cfg.nodecfg[i].local_addr));
								if(uifc.input(WIN_MID|WIN_SAV,0,0
									,"Local Source Address (AKA) to Use",str
									,25,K_EDIT) >= 0) {
									if(str[0])
										cfg.nodecfg[i].local_addr = atofaddr(str);
									else
										cfg.nodecfg[i].local_addr.zone = 0;
									uifc.changes=TRUE;
								}
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Route To ~\n\n"
	"When using a BSO/FLO type mailer, this is the Fido address to route mail\n"
	"for this node(s) to.\n"
	"\n"
	"This option is normally only used with wildcard type node entries\n"
	"(e.g. `ALL`, or `1:ALL`, `2:ALL`, etc.) and is used to route non-direct\n"
	"NetMail packets to your uplink node (hub).\n";
								SAFECOPY(str,faddrtoa(&cfg.nodecfg[i].route));
								if(uifc.input(WIN_MID|WIN_SAV,0,0
									,"Node Address to Route To",str
									,25,K_EDIT) >= 0) {
									if(str[0])
										cfg.nodecfg[i].route=atofaddr(str);
									else
										cfg.nodecfg[i].route.zone=0;
									uifc.changes=TRUE;
								}
								break;
							case __COUNTER__:
								uifc.input(WIN_MID|WIN_SAV,0,0,"Inbound FileBox Directory"
									,cfg.nodecfg[i].inbox, sizeof(cfg.nodecfg[i].inbox)-1
									,K_EDIT);
								break;
							case __COUNTER__:
								uifc.input(WIN_MID|WIN_SAV,0,0,"Outbound FileBox Directory"
									,cfg.nodecfg[i].outbox, sizeof(cfg.nodecfg[i].outbox)-1
									,K_EDIT);
								break;
							case __COUNTER__:
								binkp_settings(&cfg.nodecfg[i]);
								break;
						}
					}
				}
				break;

			case 5:	/* Paths and Filenames... */
				j=0;
				while(1) {
					i=0;
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Non-secure Inbound Directory"
						,cfg.inbound[0] ? cfg.inbound : DEFAULT_INBOUND);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Secure Inbound Directory"
						,cfg.secure_inbound[0] ? cfg.secure_inbound : DEFAULT_SECURE_INBOUND);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Outbound Directory"
						,cfg.outbound[0] ? cfg.outbound : DEFAULT_OUTBOUND);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Area File"
						,cfg.areafile[0] ? cfg.areafile : DEFAULT_AREA_FILE);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Bad Area File"
						,cfg.badareafile[0] ? cfg.badareafile : DEFAULT_BAD_AREA_FILE);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Log File"
						,cfg.logfile[0] ? cfg.logfile : DEFAULT_LOG_FILE);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Echo Statistics File"
						,cfg.echostats[0] ? cfg.echostats : DEFAULT_ECHOSTATS_FILE);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Temporary File Directory"
						,cfg.temp_dir[0] ? cfg.temp_dir	: DEFAULT_TEMP_DIR);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Outgoing Semaphore File"
						,cfg.outgoing_sem);
					opt[i][0]=0;
					uifc.helpbuf=
						"~ Paths and Filenames ~\n\n"
						"From this menu you can configure the paths and filenames that SBBSecho\n"
						"will use during its operation (e.g. importing and exporting messages).\n";
					j=uifc.list(WIN_BOT|WIN_L2R|WIN_ACT|WIN_SAV,0,0,0,&path_opt,0
						,"Paths and Filenames",opt);
					if(j==-1)
						break;
					switch(j) {
						case 0:
	uifc.helpbuf=
	"~ Non-secure Inbound Directory ~\n\n"
	"This is the path where your FTN mailer stores, and where SBBSecho will\n"
	"look for, incoming files (potentially including message bundles and\n"
	"packets) from unauthenticated (non-secure) mailer sessions.\n"
	"\n"
	"Default value is `" DEFAULT_INBOUND "`."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Non-secure Inbound Directory"
								,cfg.inbound,sizeof(cfg.inbound)-1
								,K_EDIT);
							break;

						case 1:
	uifc.helpbuf=
	"~ Secure Inbound Directory ~\n\n"
	"This is the path where your FTN mailer stores, and where SBBSecho will\n"
	"look for, incoming message bundles and packets for `Secure` (password\n"
	"protected) sessions.\n"
	"\n"
	"Default value is `" DEFAULT_SECURE_INBOUND "`."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Secure Inbound Directory"
								,cfg.secure_inbound,sizeof(cfg.secure_inbound)-1
								,K_EDIT);
							break;

						case 2:
	uifc.helpbuf=
	"~ Outbound Directory ~\n\n"
	"This is the path where your FTN mailer will look for, and where SBBSecho\n"
	"will place, outgoing message bundles and packets.\n"
	"\n"
	"In Binkley-Style Outbound mode, this serves as the base directory\n"
	"name for special foreign zone and point destination nodes as well."
	"\n"
	"Default value is `" DEFAULT_OUTBOUND "`."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Outbound Directory"
								,cfg.outbound,sizeof(cfg.outbound)-1
								,K_EDIT);
							break;

						case 3:
	uifc.helpbuf=
	"~ Area File ~\n\n"
	"This is the path of the file SBBSecho will use as your primary\n"
	"list of FidoNet-style message areas (default is `data/areas.bbs`).\n"
	"\n"
	"Each line in the file defines an FTN message area (echo) of the format:\n"
	"\n"
	"   <`code`> <`tag`> [[`link`] [`link`] [...]]\n"
	"\n"
	"Each field is separated by one or more white-space characters:\n"
	"\n"
	"   `<code>` is the Synchronet `internal code` for the local sub-board\n"
	"   `<tag>`  is the network's agreed-upon `echo tag` for the message area\n"
	"   `[link]` is an `FTN address` to send and receive messages for this area\n"
	"          (there may be many linked nodes for each area)\n"
	"          (often your FTN uplink/hub may be the only linked node)\n"
	"\n"
	"Example Area Line:\n"
	"\n"
	"   `FIDO_BBS_CARN    BBS_CARNIVAL                        1:218/700`\n"
	"\n"
	"Notes:\n"
	"\n"
	" `*` Only the `<code>` and `<tag>` fields are required\n"
	" `*` The `<code>` and `<tag>` fields are case in-sensitive\n"
	" `*` The `[link]` fields must be 2D, 3D, or 4D FidoNet-style node addresses\n"
	" `*` The '`<`' and '`>`', '`[`' and '`]`' characters are not part of the syntax\n"
	" `*` Lines beginning with a semicolon (`;`) are ignored (i.e. comments)\n"
	" `*` Leading white-space characters are ignored\n"
	" `*` Blank lines are ignored\n"
	" `*` A `<tag>` value of `*` indicates a `bad echo` (unknown) area\n"
	" `*` A `<code>` value of `P` indicates a pass-through message area\n"
	" `*` This file may be import/exported to/from your `Message Areas` in `SCFG`\n"
	" `*` This file may be remotely modified by authorized nodes using `AreaFix`\n"
	"\n"
	"Default value is `" DEFAULT_AREA_FILE "`."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Area File"
								,cfg.areafile,sizeof(cfg.areafile)-1
								,K_EDIT);
							break;

						case 4:
	uifc.helpbuf=
	"~ Bad Area File ~\n\n"
	"This is the path of the file SBBSecho will use to record the names\n"
	"(echo tags) and descriptions of FTN message areas (echoes) that your\n"
	"system has received EchoMail for, but does not carry locally. The\n"
	"default path/filename is `" DEFAULT_BAD_AREA_FILE "`.\n"
	"\n"
	"Notes:\n"
	"\n"
	" `*` The descriptions of the areas will only be included if the\n"
	"   corresponding echo tags can be located in one of your configured\n"
	"   `EchoLists`.\n"
	"\n"
	" `*` The format of the file is the same as `BACKBONE.NA` and suitable for\n"
	"   importing into a Synchronet Message Group using `SCFG`.\n"
	"\n"
	" `*` SBBSecho will automatically sort and maintain this list, removing\n"
	"   areas if they are added to your configuration (`SCFG->Message Areas`)\n"
	"   and your `Area File`.\n"
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Bad Area File"
								,cfg.badareafile,sizeof(cfg.badareafile)-1
								,K_EDIT);
							break;

						case 5:
	uifc.helpbuf=
	"~ Log File ~\n\n"
	"This is the path of the file SBBSecho will use to log information each\n"
	"time it is run (default is `" DEFAULT_LOG_FILE "`)."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Log File"
								,cfg.logfile,sizeof(cfg.logfile)-1
								,K_EDIT);
							break;

						case 6:
	uifc.helpbuf=
	"~ EchoStats File ~\n\n"
	"This is the path of the file SBBSecho will use to track statistics for\n"
	"EchoMail message areas (default is `" DEFAULT_ECHOSTATS_FILE "`)."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"EchoStats File"
								,cfg.echostats,sizeof(cfg.echostats)-1
								,K_EDIT);
							break;

						case 7:
	uifc.helpbuf=
	"~ Temporary File Directory ~\n\n"
	"This is the directory where SBBSecho will store temporary files that\n"
	"it creates and uses during its run-time (default is `" DEFAULT_TEMP_DIR "`)."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Temp Dir"
								,cfg.temp_dir,sizeof(cfg.temp_dir)-1
								,K_EDIT);
							break;

						case 8:
	uifc.helpbuf=
	"~ Outgoing Semaphore File ~\n\n"
	"This is an optional file to create/touch whenever there are new outbound\n"
	"files created or updated by SBBSecho."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Outgoing Sem File"
								,cfg.outgoing_sem,sizeof(cfg.outgoing_sem)-1
								,K_EDIT);
							break;
					}
				}
				break;

			case 3:	/* NetMail Settings */
				j=0;
				while(1) {
					uifc.helpbuf=
	"~ NetMail Settings ~\n"
	"\n"
	"`Sysop Aliases` is a comma-separated list of names by which the sysop\n"
	"    (user #1) may receive NetMail messages, in addition to the alias\n"
	"    and real name associated with their BBS user account.\n"
	"    This setting defaults to just '`SYSOP`'.\n"
	"\n"
    "`Default Recipient` is the name of the user account you wish to receive\n"
	"    inbound NetMail messages that have been addressed to an unrecognized\n"
	"    user name or alias.\n"
	"\n"
	"`Fuzzy Zone Operation` when set to `Yes`, if SBBSecho receives an inbound\n"
	"    netmail with `NO` international zone information, it will compare the\n"
	"    net/node of the destination to the net/node information in your AKAs\n"
	"    and assume the (source and destination) zone of a matching AKA.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Kill/Ignore Empty NetMail Messages` will instruct SBBSecho to simply\n"
	"    discard (not import or export) NetMail messages without any body.\n"
	"    This setting defaults to `Yes`.\n"
	"\n"
	"`Delete Processed NetMail Messages` will instruct SBBSecho to delete\n"
	"    NetMail messages/files after they have been sent or imported.\n"
	"    When set to `No`, SBBSecho will mark them as Sent or Received instead.\n"
	"    This setting defaults to `Yes`.\n"
	"\n"
	"`Ignore NetMail Destination Address` will instruct SBBSecho to treat\n"
	"    all NetMail as though it is destined for one of your systems's FTN\n"
	"    addresses (AKAs) and potentially import it.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Ignore Netmail 'Sent' Attribute` will instruct SBBSecho to export\n"
	"    NetMail messages even when their 'Sent' attribute flag is set.\n"
	"    This setting `should not` be set to `Yes` when `Delete NetMail` is\n"
	"    disabled.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Ignore Netmail 'KillSent' Attribute` will instruct SBBSecho to ignore\n"
	"    this attribute flag and will `not` delete Sent NetMail.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Ignore Netmail 'Received' Attribute` will instruct SBBSecho to import\n"
	"    NetMail messages even when their 'Received' attribute flag is set.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Ignore NetMail 'Local' Attribute` will instruct SBBSecho to import\n"
	"    NetMail messages even when their 'Local' attribute flag is set.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Maximum Age of Imported NetMail` allows you to optionally set an age\n"
	"    limit of NetMail messages that may be imported.\n"
	"    This setting defaults to `None` (no maximum age).\n"
;
					i=0;
					strListCombine(cfg.sysop_alias_list, sysop_aliases, sizeof(sysop_aliases)-1, ",");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%s", "Sysop Aliases",sysop_aliases);
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%s", "Default Recipient"
						,cfg.default_recipient);
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Fuzzy Zone Operation"
						,cfg.fuzzy_zone ? "Yes":"No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Kill/Ignore Empty NetMail "
						"Messages",cfg.kill_empty_netmail ? "Yes":"No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Delete Processed NetMail"
						,cfg.delete_netmail ? "Yes":"No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail Destination Address"
						,cfg.ignore_netmail_dest_addr ? "Yes" : "No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail 'Sent' Attribute"
						,cfg.ignore_netmail_sent_attr ? "Yes" : "No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail 'KillSent' Attribute"
						,cfg.ignore_netmail_kill_attr ? "Yes" : "No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail 'Received' Attribute"
						,cfg.ignore_netmail_recv_attr ? "Yes" : "No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail 'Local' Attribute"
						,cfg.ignore_netmail_local_attr ? "Yes" : "No");
					if(cfg.max_netmail_age)
						duration_to_vstr(cfg.max_netmail_age, str, sizeof(str));
					else
						SAFECOPY(str, "None");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%s","Maximum Age of Imported NetMail"	, str);
					opt[i][0]=0;
					j=uifc.list(WIN_ACT|WIN_SAV,0,0,0,&netmail_opt,0,"NetMail Settings",opt);
					if(j==-1)
						break;
					switch(j) {
						case 0:
							uifc.helpbuf=
							"~ Sysop Aliases ~\n\n"
							"This is a comma-separated list of additional `To` names that the sysop\n"
							"(user #1) can receive netmail by. When specifying multiple aliases,\n"
							"they must be separated by a single comma and no extra white-space\n"
							"(e.g. \"SYSOP,COORDINATOR\"). The default value is just `SYSOP`.\n";
							if(uifc.input(WIN_MID|WIN_BOT|WIN_SAV,0,0,"Sysop Aliases (comma separated)"
								,sysop_aliases
								,sizeof(sysop_aliases)-1,K_EDIT|K_UPPER) >= 0) {
								strListFree(&cfg.sysop_alias_list);
								cfg.sysop_alias_list = strListSplit(NULL, sysop_aliases, ",");
							}
							break;
						case 1:
							uifc.input(WIN_MID|WIN_SAV,0,0,"Default Recipient"
								,cfg.default_recipient, sizeof(cfg.default_recipient)-1
								,K_EDIT|K_UPPER);
							break;
						case 2:
							k = !cfg.fuzzy_zone;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Fuzzy Zone Operation",uifcYesNoOpts)) {
								case 0:	cfg.fuzzy_zone = true;	break;
								case 1:	cfg.fuzzy_zone = false;	break;
							}
							break;
						case 3:
							k = !cfg.kill_empty_netmail;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Delete Empty NetMail",uifcYesNoOpts)) {
								case 0:	cfg.kill_empty_netmail = true;	break;
								case 1:	cfg.kill_empty_netmail = false;	break;
							}
							break;
						case 4:
							k = !cfg.delete_netmail;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Delete Processed NetMail",uifcYesNoOpts)) {
								case 0:	cfg.delete_netmail = true;	break;
								case 1:	cfg.delete_netmail = false;	break;
							}
							break;
						case 5:
							k = !cfg.ignore_netmail_dest_addr;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Ignore NetMail Destination Address",uifcYesNoOpts)) {
								case 0:	cfg.ignore_netmail_dest_addr = true;	break;
								case 1:	cfg.ignore_netmail_dest_addr = false;	break;
							}
							break;
						case 6:
							k = !cfg.ignore_netmail_sent_attr;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Ignore NetMail 'Sent' Attribute",uifcYesNoOpts)) {
								case 0:	cfg.ignore_netmail_sent_attr = true;	break;
								case 1:	cfg.ignore_netmail_sent_attr = false;	break;
							}
							break;
						case 7:
							k = !cfg.ignore_netmail_kill_attr;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Ignore NetMail 'KillSent' Attribute",uifcYesNoOpts)) {
								case 0:	cfg.ignore_netmail_kill_attr = true;	break;
								case 1:	cfg.ignore_netmail_kill_attr = false;	break;
							}
							break;
						case 8:
							k = !cfg.ignore_netmail_recv_attr;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Ignore NetMail 'Received' Attribute",uifcYesNoOpts)) {
								case 0:	cfg.ignore_netmail_recv_attr = true;	break;
								case 1:	cfg.ignore_netmail_recv_attr = false;	break;
							}
							break;
						case 9:
							k = !cfg.ignore_netmail_local_attr;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Ignore NetMail 'Local' Attribute",uifcYesNoOpts)) {
								case 0:	cfg.ignore_netmail_local_attr = true;	break;
								case 1:	cfg.ignore_netmail_local_attr = false;	break;
							}
							break;
						case 10:
							uifc.helpbuf=
							"~ Maximum Age of Imported NetMail ~\n\n"
							"Maximum age of NetMail that may be imported. The age is based\n"
							"on the date supplied in the message header and may be incorrect in some\n"
							"conditions (e.g. erroneous software or incorrect system date).\n"
							"Set this value to `0` to disable this feature (no maximum age imposed)."
							;
							if(cfg.max_netmail_age)
								duration_to_vstr(cfg.max_netmail_age, str, sizeof(str));
							else
								SAFECOPY(str, "None");
							if(uifc.input(WIN_MID|WIN_BOT|WIN_SAV,0,0,"Maximum NetMail Age"
								,str, 10, K_EDIT) >= 0)
								cfg.max_netmail_age = (ulong)parse_duration(str);
							break;

					}
				}
				break;

			case 4:	/* EchoMail Settings */
				j=0;
				while(1) {
					uifc.helpbuf=
	"~ EchoMail Settings ~\n"
	"\n"
	"`Area Manager` is the BBS user name or alias to notify (via email) of\n"
	"    AreaFix activities and errors.  This setting defaults to `SYSOP`.\n"
	"\n"
	"`Maximum Packet Size` is the largest packet file size that SBBSecho will\n"
	"    normally create (in bytes).\n"
	"    This settings defaults to `250K` (250 Kilobytes, or 256,000 bytes).\n"
	"\n"
	"`Maximum Bundle Size` is the largest bundle file size that SBBSecho will\n"
	"    normally create (in bytes).\n"
	"    This settings defaults to `250K` (250 Kilobytes, or 256,000 bytes).\n"
	"\n"
	"`Secure Operation` tells SBBSecho to check the Area File (e.g. areas.bbs)\n"
	"    to insure that the packet origin (FTN address) of EchoMail messages\n"
	"    is already linked to the EchoMail area where the message was posted.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Notify Users of Received EchoMail` tells SBBSecho to send telegrams\n"
	"    (short messages) to BBS users when EchoMail addressed to their name\n"
	"    or alias has been imported into a message base that the user has\n"
	"    access to read.\n"
	"\n"
	"`Convert Existing Tear Lines` tells SBBSecho to convert any tear lines\n"
	"    (`---`) existing in outgoing EchoMail message text to `===`.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Automatically Add New Subs to Area List`, when enabled, instructs\n"
	"    SBBSecho to detect newly added Sub-boards in any Message Groups that\n"
	"    are listed with a `Linked Node` as their hub/uplink and add those new\n"
	"    Sub-boards as new areas to your Area List and optionally, Area File.\n"
	"\n"
	"`Allow Nodes to Add Areas from Area File` when set to `Yes` allows linked\n"
	"    nodes to add areas listed in your Area File (e.g. `areas.bbs`).\n"
	"    When set to `No`, only areas found in one or more `EchoLists` may be\n"
	"    added via AreaFix, provided the linked node has access.\n"
	"    This setting defaults to `Yes`.\n"
	"\n"
	"`Maximum Backups to Maintain of Area File` defines the number of backup\n"
	"    versions SBBSecho will maintain of your Area File (e.g. `areas.bbs`).\n"
	"\n"
	"`Circular Path Detection` when `Enabled` will cause SBBSecho, during\n"
	"    EchoMail import, to check the PATH kludge lines for any of the\n"
	"    system's AKAs and if found (indicating a message loop), not import\n"
	"    the message.\n"
	"\n"
	"`Relay Filtered Messages` controls whether or not incoming messages that\n"
	"    have been filtered (e.g. due to maximum message age restrictions)\n"
	"    are to be forwarded to downlinks.\n"
	"\n"
	"`Outbound Bundle Attachments` may be either `Deleted` (killed) or `Truncated`\n"
	"    (changed to 0-bytes in length) after being sent by your mailer.\n"
	"    This only controls the bundle prefix that is written to the FLO\n"
	"    files (`#` for truncate, `^` for delete).\n"
	"\n"
	"`Zone Blind SEEN-BY and PATH Lines` when `Enabled` will cause SBBSecho\n"
	"    to assume that node numbers are not duplicated across zones and\n"
	"    that a net/node combination in either of these Kludge lines should\n"
	"    be used to identify a specific node regardless of which zone that\n"
	"    node is located (thus breaking the rules of FidoNet 3D addressing).\n"
	"\n"
	"`Maximum Age of Imported EchoMail` allows you to optionally set an age\n"
	"    limit of EchoMail messages that may be imported.\n"
	"    This setting defaults to `60 days`.\n"
	;

					i=0;
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s", "Area Manager",cfg.areamgr);
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%luK","Maximum Packet Size"
						,cfg.maxpktsize/1024UL);
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%luK","Maximum Bundle Size"
						,cfg.maxbdlsize/1024UL);
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%-3.3s","Secure Operation"
						,cfg.secure_echomail ? "Yes":"No");
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%-3.3s","Notify Users of Received EchoMail"
						,cfg.echomail_notify ? "Yes":"No");
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%-3.3s","Convert Existing Tear Lines"
						,cfg.convert_tear ? "Yes":"No");
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Automatically Add New Subs "
						"to Area List", cfg.auto_add_subs ? (cfg.auto_add_to_areafile ? "List/File":"List Only"):"No");
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%-3.3s","Allow Nodes to Add Areas "
						"from Area File",cfg.add_from_echolists_only ? "No":"Yes");
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%u","Maximum Backups to Maintain of Area File"
						,cfg.areafile_backups);
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Circular Path Detection"
						,cfg.check_path ? "Enabled" : "Disabled");
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Relay Filtered Messages"
						,cfg.relay_filtered_msgs ? "Yes" : "No");
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Outbound Bundle Attachments"
						,cfg.trunc_bundles ? "Truncate" : "Delete");
					if(cfg.zone_blind)
						sprintf(str,"Zones 1-%u", cfg.zone_blind_threshold);
					else
						SAFECOPY(str,"Disabled");
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Zone Blind SEEN-BY and PATH Lines", str);
					if(cfg.max_echomail_age)
						duration_to_vstr(cfg.max_echomail_age, str, sizeof(str));
					else
						SAFECOPY(str, "None");
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Maximum Age of Imported EchoMail", str);
					opt[i][0]=0;
					j=uifc.list(WIN_ACT|WIN_MID|WIN_SAV,0,0,0,&echomail_opt,0,"EchoMail Settings",opt);
					if(j==-1)
						break;
					switch(j) {
						case 0:
				uifc.helpbuf=
				"~ Area Manager ~\n\n"
				"Local user to notify of AreaFix activity and errors.\n";
							uifc.input(WIN_MID|WIN_BOT|WIN_SAV,0,0,"Area Manager (user name or alias)"
								,cfg.areamgr
								,LEN_ALIAS,K_EDIT);
							break;

						case 1:
				uifc.helpbuf=
				"~ Maximum Packet Size ~\n\n"
				"This is the maximum file size that SBBSecho will create when placing\n"
				"outgoing messages into packets.  The default max size is 250 Kilobytes.\n";
							sprintf(str,"%lu",cfg.maxpktsize);
							uifc.input(WIN_MID|WIN_BOT|WIN_SAV,0,0,"Maximum Packet Size (in Bytes)",str
								,9,K_EDIT|K_NUMBER);
							cfg.maxpktsize=atol(str);
							break;

						case 2:
				uifc.helpbuf=
				"~ Maximum Bundle Size ~\n\n"
				"This is the maximum file size that SBBSecho will create when placing\n"
				"outgoing packets into bundles.  The default max size is 250 Kilobytes.\n";
							sprintf(str,"%lu",cfg.maxbdlsize);
							uifc.input(WIN_MID|WIN_BOT|WIN_SAV,0,0,"Maximum Bundle Size (in Bytes)",str
								,9,K_EDIT|K_NUMBER);
							cfg.maxbdlsize=atol(str);
							break;
						case 3:
							k = !cfg.secure_echomail;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Secure Operation",uifcYesNoOpts)) {
								case 0:	cfg.secure_echomail = true;		break;
								case 1:	cfg.secure_echomail = false;	break;
							}
							break;
						case 4:
							k = !cfg.echomail_notify;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Notify Users",uifcYesNoOpts)) {
								case 0:	cfg.echomail_notify = true;		break;
								case 1:	cfg.echomail_notify = false;	break;
							}
							break;
						case 5:
							k = !cfg.convert_tear;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Convert Tear Lines",uifcYesNoOpts)) {
								case 0:	cfg.convert_tear = true;	break;
								case 1:	cfg.convert_tear = false;	break;
							}
							break;
						case 6:
							i=0;
							strncpy(opt[i++], "Area List (memory) Only", MAX_OPLN-1);
							strncpy(opt[i++], "Area List and Area File", MAX_OPLN-1);
							strncpy(opt[i++], "No", MAX_OPLN-1);
							opt[i][0] = 0;
							if(!cfg.auto_add_subs)
								k = 2;
							else if(cfg.auto_add_to_areafile)
								k = 1;
							else
								k = 0;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Automatically Add New Sub-boards to Area List",opt)) {
								case 0:	cfg.auto_add_subs = true;	cfg.auto_add_to_areafile = false; break;
								case 1:	cfg.auto_add_subs = true;	cfg.auto_add_to_areafile = true; break;
								case 2:	cfg.auto_add_subs = false;	break;
							}
							break;
						case 7:
							k = cfg.add_from_echolists_only;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Allow AreaFix-Add from Area File",uifcYesNoOpts)) {
								case 0:	cfg.add_from_echolists_only = false;	break;
								case 1:	cfg.add_from_echolists_only = true;		break;
							}
							break;
						case 8:
							sprintf(str, "%u", cfg.areafile_backups);
							if(uifc.input(WIN_MID|WIN_SAV, 0, 0, "Total Area File Backups to Maintain"
								,str, 5, K_EDIT|K_NUMBER) >= 0)
								cfg.areafile_backups = atoi(str);
							break;
						case 9:
							k = !cfg.check_path;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Circular Path Detection",uifcYesNoOpts)) {
								case 0:	cfg.check_path = true;	break;
								case 1:	cfg.check_path = false;	break;
							}
							break;
						case 10:
							k = !cfg.check_path;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Relay Filtered EchoMail Messages",uifcYesNoOpts)) {
								case 0:	cfg.relay_filtered_msgs = true;		break;
								case 1:	cfg.relay_filtered_msgs = false;	break;
							}
							break;
						case 11:
						{
							k = cfg.trunc_bundles;
							char* opt[] = {"Delete after Sent", "Truncate after Sent", NULL };
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Outbound Bundles",opt)) {
								case 0:	cfg.trunc_bundles = false;	break;
								case 1:	cfg.trunc_bundles = true;	break;
							}
							break;
						}
						case 12:
							k = !cfg.zone_blind;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0,"Zone Blind",uifcYesNoOpts)) {
								case 0:
									cfg.zone_blind = true;
									uifc.helpbuf=
									"Zone Blind Threshold";
									sprintf(str,"%u",cfg.zone_blind_threshold);
									if(uifc.input(WIN_MID|WIN_SAV,0,0
										,"Zone Blind Threshold (highest zone in the blind range)"
										, str, 5, K_EDIT|K_NUMBER) >= 0)
										cfg.zone_blind_threshold = (uint16_t)atol(str);
									break;
								case 1:
									cfg.zone_blind = false;
									break;
							}
							break;
						case 13:
							uifc.helpbuf=
							"~ Maximum Age of Imported EchoMail ~\n\n"
							"Maximum age of EchoMail that may be imported. The age is based\n"
							"on the date supplied in the message header and may be incorrect in some\n"
							"conditions (e.g. erroneous software or incorrect system date).\n"
							"Set this value to `0` to disable this feature (no maximum age imposed)."
							;
							if(cfg.max_echomail_age)
								duration_to_vstr(cfg.max_echomail_age, str, sizeof(str));
							else
								SAFECOPY(str, "None");
							if(uifc.input(WIN_MID|WIN_BOT|WIN_SAV,0,0,"Maximum EchoMail Age"
								,str, 10, K_EDIT) >= 0)
								cfg.max_echomail_age = (ulong)parse_duration(str);
							break;