Newer
Older
" or authenticating `.TIC` files.\n"
" This setting may be managed by the node using AreaFix requests.\n"
"\n"
"`AreaFix Support` is a toggle that determines whether or not this node\n"
" may send AreaFix NetMail requests to your system to perform remote\n"
" area and account management.\n"
"\n"
"`AreaFix Password` is an optional password used to authenticate inbound\n"
" AreaFix NetMail requests (Remote Area Management) from this node.\n"
" AreaFix Passwords are case insensitive.\n"
" This setting may be managed by the node using AreaFix requests.\n"
"\n"
"`EchoList Keys` is a list of keys which enable AreaFix access to one or\n"
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
" more additional EchoLists.\n"
"\n"
"`Status` is the default mode for sending mail to this node: `Normal`, `Hold`\n"
" (wait for pickup) or `Crash` (immediate).\n"
"\n"
"`Direct` determines whether to connect to this node directly (whenever\n"
" possible) when sending mail to this node.\n"
"\n"
"`Passive` is used to temporarily disable (pause) the packing and sending\n"
" of EchoMail for this node. The opposite of Passive is `Active`.\n"
" This setting may be managed by the node using AreaFix requests.\n"
"\n"
"`Send Notify List` is used to flag nodes that you want notified via\n"
" NetMail of their current AreaFix settings whenever SBBSecho is run\n"
" with the '`G`' option.\n"
"\n"
"`Uplink for Message Groups` is an optional list of Message Groups (short\n"
" names) for which this node is a hub/uplink for your system. This\n"
" setting is used in combination with the `Auto Add Sub-boards` feature\n"
" to auto-link hubs with the newly added areas in your Area File.\n"
"\n"
"`Local Address` is an optional local system address (AKA) to use when\n"
" sending packets to this node. When a Local Address is not specified\n"
" SBBSecho will automatically choose the local address that matches\n"
" the destination address (zone and net number) the closest\n"
" (Best Match).\n"
"\n"
"`Route To` is only used in Binkley-Style Outbound (BSO/FLO) operating\n"
" mode and is used to set the FTN address to route mail for this node.\n"
"\n"
"`Inbox Directory` is only used in BSO operating mode and is an optional\n"
" alternate directory to search for incoming files from this node\n"
" (e.g. used in combination with BinkD's ibox setting).\n"
"\n"
"`Outbox Directory` is only used in BSO operating mode and is an optional\n"
" alternate directory to place outbound files for this node (e.g. used\n"
" in combination with BinkD's obox setting).\n"
"\n"
"`BinkP Settings` are settings specific to BinkP/BinkIT mailer operation.\n"
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Address"
,faddrtoa(&cfg.nodecfg[i].addr));
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Domain"
,cfg.nodecfg[i].domain);
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Name"
,cfg.nodecfg[i].name);
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Comment"
,cfg.nodecfg[i].comment);
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Archive Type"
,cfg.nodecfg[i].archive == SBBSECHO_ARCHIVE_NONE ?
"None":cfg.nodecfg[i].archive->name);
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Packet Type"
,pktTypeStringList[cfg.nodecfg[i].pkt_type]);
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Packet Password"
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Session Password"
,cfg.nodecfg[i].sesspwd);
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","TIC File Password"
,cfg.nodecfg[i].ticpwd);
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","AreaFix Support"
,cfg.nodecfg[i].areafix ? "Yes" : "No");
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","AreaFix Password"
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","EchoList Keys"
,strListCombine(cfg.nodecfg[i].keys,str,sizeof(str),","));
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Status"
,mailStatusStringList[cfg.nodecfg[i].status]);
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Direct"
,cfg.nodecfg[i].direct ? "Yes":"No");
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Passive"
,cfg.nodecfg[i].passive ? "Yes":"No");
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Send Notify List"
,cfg.nodecfg[i].send_notify ? "Yes" : "No");
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Uplink for Message Groups"
,strListCombine(cfg.nodecfg[i].grphub,str,sizeof(str),","));
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Local Address (AKA)"
,cfg.nodecfg[i].local_addr.zone
? faddrtoa(&cfg.nodecfg[i].local_addr) : "Best Match");
if(cfg.flo_mailer) {
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Route To"
if(!faddr_contains_wildcard(&cfg.nodecfg[i].addr)) {
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s", "Inbox Directory", cfg.nodecfg[i].inbox);
snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s", "Outbox Directory", cfg.nodecfg[i].outbox);
strcpy(opt[j++], "BinkP Settings...");
}
,cfg.nodecfg[i].name[0] ? cfg.nodecfg[i].name : faddrtoa(&cfg.nodecfg[i].addr));
k=uifc.list(WIN_MID|WIN_ACT|WIN_SAV,0,0,0,&nodeop,&nodeopbar,str,opt);
if(k==-1)
break;
switch(k) {
"~ Address ~\n\n"
"This is the FidoNet style address of this linked node.\n";
SAFECOPY(str,faddrtoa(&cfg.nodecfg[i].addr));
,"Node Address (ALL wildcard allowed)",str
,25,K_EDIT|K_UPPER)>0)
cfg.nodecfg[i].addr=atofaddr(str);
"~ Domain ~\n\n"
"This is the domain portion of the 5D FTN address of this linked node\n"
"(e.g. '`fidonet`'). FTN domains are limited to 8 characters and must not\n"
"contain the characters '@' or '.'.\n"
"\n"
"This setting is currently not used by SBBSecho but is available and\n"
"managed here for 5D address use by BinkIT.";
uifc.input(WIN_MID|WIN_SAV,0,0
,"Domain"
,cfg.nodecfg[i].domain, sizeof(cfg.nodecfg[i].domain)-1
,K_EDIT);
break;
case __COUNTER__:
uifc.helpbuf=
"~ Name ~\n\n"
"This is an optional NetMail destination name for the node (e.g. the sysop's name).\n"
"This is used for AreaFix Notification NetMail messages.\n";
uifc.input(WIN_MID|WIN_SAV,0,0
,"Name"
,cfg.nodecfg[i].name,sizeof(cfg.nodecfg[i].name)-1
,K_EDIT);
break;
case __COUNTER__:
"~ Comment ~\n\n"
"This is an optional comment for the node (e.g. the sysop's name).\n"
"This is used for informational purposes only.\n";
uifc.input(WIN_MID|WIN_SAV,0,0
,"Comment"
,cfg.nodecfg[i].comment,sizeof(cfg.nodecfg[i].comment)-1
,K_EDIT);
break;
"~ Archive Type ~\n\n"
"This is the archive type that will be used for compressing packets\n"
"into archive bundles for this node.\n";
int cur=cfg.arcdefs;
for(u=0;u<cfg.arcdefs;u++) {
if(cfg.nodecfg[i].archive == &cfg.arcdef[u])
cur=u;
strcpy(opt[u],cfg.arcdef[u].name);
strcpy(opt[u++],"None");
opt[u][0]=0;
,"Archive Type",opt);
if(k==-1)
break;
if((unsigned)k>=cfg.arcdefs)
cfg.nodecfg[i].archive = &cfg.arcdef[k];
uifc.changes=TRUE;
"~ Packet Type ~\n\n"
"This is the packet header type that will be used in mail packets\n"
"created for this node. SBBSecho defaults to creating `Type-2+` packets.\n"
"\n"
"`Type-2 ` packets are defined in FTS-0001.16 (Stone Age)\n"
"`Type-2e ` packets are defined in FSC-0039.04 (Sometimes called 2+)\n"
"`Type-2+ ` packets are defined in FSC-0048.02 (4D address support)\n"
"`Type-2.2` packets are defined in FSC-0045.01 (5D address support)\n"
j=cfg.nodecfg[i].pkt_type;
k=uifc.list(WIN_RHT|WIN_SAV,0,0,0,&j,0,"Packet Type"
if(k==-1)
break;
cfg.nodecfg[i].pkt_type=k;
"~ Packet Password ~\n\n"
"This is an optional password that SBBSecho will place into packets\n"
"destined for this node.\n"
"\n"
"Packet passwords are `case-insensitive`";
uifc.input(WIN_MID|WIN_SAV,0,0
,"Packet Password (optional)"
,cfg.nodecfg[i].pktpwd,sizeof(cfg.nodecfg[i].pktpwd)-1
,K_EDIT|K_UPPER);
"~ Session Password ~\n\n"
"This is an optional password that BinkIT will use for authenticated\n"
"BinkP sessions with this node.\n"
"\n"
"Session passwords are `case-sensitive`";
uifc.input(WIN_MID|WIN_SAV,0,0
,"Session Password"
,cfg.nodecfg[i].sesspwd,sizeof(cfg.nodecfg[i].sesspwd)-1
,K_EDIT);
break;
case __COUNTER__:
uifc.helpbuf=
"This is an optional password that tickit.js will use for creating\n"
uifc.input(WIN_MID|WIN_SAV,0,0
,"TIC File Password (optional)"
,cfg.nodecfg[i].ticpwd,sizeof(cfg.nodecfg[i].ticpwd)-1
,K_EDIT|K_UPPER);
break;
case __COUNTER__:
uifc.helpbuf=
"~ AreaFix Support ~\n\n"
"If you wish for this node to be able to remotely query or change their\n"
"configuration via `AreaFix` NetMail messages, set to option to `Yes`.\n";
k = cfg.nodecfg[i].areafix;
switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
,"AreaFix Support",uifcYesNoOpts)) {
case 0: cfg.nodecfg[i].areafix = true; uifc.changes=TRUE; break;
case 1: cfg.nodecfg[i].areafix = false; uifc.changes=TRUE; break;
}
break;
case __COUNTER__:
uifc.helpbuf=
"~ AreaFix Password ~\n\n"
"This is the password that will be used by this node when doing remote\n"
"AreaManager / AreaFix functions.\n";
uifc.input(WIN_MID|WIN_SAV,0,0
,cfg.nodecfg[i].password,sizeof(cfg.nodecfg[i].password)-1
,K_EDIT|K_UPPER);
"These are a named-keys to be given to this node allowing access to one\n"
"or more of the configured `EchoLists` for remote area-add requests.\n";
for(j=0; cfg.nodecfg[i].keys!=NULL && cfg.nodecfg[i].keys[j]!=NULL ;j++)
strcpy(opt[j],cfg.nodecfg[i].keys[j]);
opt[j][0]=0;
k=uifc.list(WIN_SAV|WIN_INS|WIN_DEL|WIN_ACT|
WIN_XTR|WIN_INSACT|WIN_DELACT|WIN_RHT
if(k==-1)
break;
if((k&MSK_ON)==MSK_INS) {
k&=MSK_OFF;
if(uifc.input(WIN_MID|WIN_SAV,0,0
strListInsert(&cfg.nodecfg[i].keys, str, k);
uifc.changes=TRUE;
}
if((k&MSK_ON)==MSK_DEL) {
k&=MSK_OFF;
strListRemove(&cfg.nodecfg[i].keys, k);
uifc.changes=TRUE;
}
,str,SBBSECHO_MAX_KEY_LEN,K_EDIT|K_UPPER);
strListReplace(cfg.nodecfg[i].keys, k, str);
uifc.changes=TRUE;
}
"~ Mail Status ~\n\n"
"Set the mail status for this node: `Normal`, `Hold`, or `Crash`.\n";
j=cfg.nodecfg[i].status;
k=uifc.list(WIN_RHT|WIN_SAV,0,0,0,&j,0,"Mail Status"
,mailStatusStringList);
if(k==-1)
break;
if(cfg.nodecfg[i].status!=k) {
cfg.nodecfg[i].status=k;
uifc.changes=TRUE;
}
k = !cfg.nodecfg[i].direct;
switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
,"Direct Delivery",uifcYesNoOpts)) {
case 0: cfg.nodecfg[i].direct = true; uifc.changes=TRUE; break;
case 1: cfg.nodecfg[i].direct = false; uifc.changes=TRUE; break;
}
k = !cfg.nodecfg[i].passive;
switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
,"Passive Node",uifcYesNoOpts)) {
case 0: cfg.nodecfg[i].passive = true; uifc.changes=TRUE; break;
case 1: cfg.nodecfg[i].passive = false; uifc.changes=TRUE; break;
}
k = !cfg.nodecfg[i].send_notify;
switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
,"Send AreaFix Notifications",uifcYesNoOpts)) {
case 0: cfg.nodecfg[i].send_notify = true; uifc.changes=TRUE; break;
case 1: cfg.nodecfg[i].send_notify = false; uifc.changes=TRUE; break;
}
break;
"~ Uplink for Message Groups ~\n\n"
"These are Message Group short names (as configured in SCFG) for which\n"
"this linked node is your system's uplink (hub).\n"
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
"\n"
"Use of this setting allows your hub to be automatically linked with new\n"
"areas when new Sub-boards (within a listed group) are auto-added to the\n"
"Area File."
;
while(1) {
for(j=0; cfg.nodecfg[i].grphub!=NULL && cfg.nodecfg[i].grphub[j]!=NULL ;j++)
strcpy(opt[j],cfg.nodecfg[i].grphub[j]);
opt[j][0]=0;
k=uifc.list(WIN_SAV|WIN_INS|WIN_DEL|WIN_ACT|
WIN_XTR|WIN_INSACT|WIN_DELACT|WIN_RHT
,0,0,0,&k,0,"Uplink for Message Groups",opt);
if(k==-1)
break;
if((k&MSK_ON)==MSK_INS) {
k&=MSK_OFF;
if(uifc.input(WIN_MID|WIN_SAV,0,0
,"Message Group (short name)",str,LEN_GSNAME
,/* kmode: */0) < 1)
continue;
strListInsert(&cfg.nodecfg[i].grphub, str, k);
uifc.changes=TRUE;
}
if((k&MSK_ON)==MSK_DEL) {
k&=MSK_OFF;
strListRemove(&cfg.nodecfg[i].grphub, k);
uifc.changes=TRUE;
}
SAFECOPY(str,cfg.nodecfg[i].grphub[k]);
uifc.input(WIN_MID|WIN_SAV,0,0,"Message Group (short name)"
,str,LEN_GSNAME,K_EDIT|K_UPPER);
strListReplace(cfg.nodecfg[i].grphub, k, str);
uifc.changes=TRUE;
continue;
}
break;
case __COUNTER__:
SAFECOPY(str,faddrtoa(&cfg.nodecfg[i].local_addr));
if(uifc.input(WIN_MID|WIN_SAV,0,0
,"Local Source Address (AKA) to Use",str
,25,K_EDIT) >= 0) {
if(str[0])
cfg.nodecfg[i].local_addr = atofaddr(str);
else
cfg.nodecfg[i].local_addr.zone = 0;
uifc.changes=TRUE;
uifc.helpbuf=
"~ Route To ~\n\n"
"When using a BSO/FLO type mailer, this is the Fido address to route mail\n"
"for this node(s) to.\n"
"\n"
"This option is normally only used with wildcard type node entries\n"
"(e.g. `ALL`, or `1:ALL`, `2:ALL`, etc.) and is used to route non-direct\n"
"NetMail packets to your uplink node (hub).\n";
SAFECOPY(str,faddrtoa(&cfg.nodecfg[i].route));
,"Node Address to Route To",str
if(str[0])
cfg.nodecfg[i].route=atofaddr(str);
else
cfg.nodecfg[i].route.zone=0;
uifc.input(WIN_MID|WIN_SAV,0,0,"Inbound FileBox Directory"
,cfg.nodecfg[i].inbox, sizeof(cfg.nodecfg[i].inbox)-1
,K_EDIT);
break;
uifc.input(WIN_MID|WIN_SAV,0,0,"Outbound FileBox Directory"
,cfg.nodecfg[i].outbox, sizeof(cfg.nodecfg[i].outbox)-1
,K_EDIT);
case __COUNTER__:
binkp_settings(&cfg.nodecfg[i]);
break;
}
while(1) {
snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Non-secure Inbound Directory"
snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Secure Inbound Directory"
,cfg.secure_inbound[0] ? cfg.secure_inbound : DEFAULT_SECURE_INBOUND);
snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Outbound Directory"
snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Bad Area File"
,cfg.badareafile[0] ? cfg.badareafile : DEFAULT_BAD_AREA_FILE);
,cfg.logfile[0] ? cfg.logfile : DEFAULT_LOG_FILE);
snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Echo Statistics File"
,cfg.echostats[0] ? cfg.echostats : DEFAULT_ECHOSTATS_FILE);
snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Temporary File Directory"
,cfg.temp_dir[0] ? cfg.temp_dir : DEFAULT_TEMP_DIR);
snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Outgoing Semaphore File"
,cfg.outgoing_sem);
uifc.helpbuf=
"~ Paths and Filenames ~\n\n"
"From this menu you can configure the paths and filenames that SBBSecho\n"
"will use during its operation (e.g. importing and exporting messages).\n";
j=uifc.list(WIN_BOT|WIN_L2R|WIN_ACT|WIN_SAV,0,0,0,&path_opt,0
,"Paths and Filenames",opt);
if(j==-1)
break;
case 0:
"~ Non-secure Inbound Directory ~\n\n"
"This is the path where your FTN mailer stores, and where SBBSecho will\n"
"look for, incoming files (potentially including message bundles and\n"
"packets) from unauthenticated (non-secure) mailer sessions.\n"
"\n"
"Default value is `" DEFAULT_INBOUND "`."
uifc.input(WIN_L2R|WIN_SAV,0,0,"Non-secure Inbound Directory"
break;
case 1:
"~ Secure Inbound Directory ~\n\n"
"This is the path where your FTN mailer stores, and where SBBSecho will\n"
"look for, incoming message bundles and packets for `Secure` (password\n"
"protected) sessions.\n"
"\n"
"Default value is `" DEFAULT_SECURE_INBOUND "`."
;
uifc.input(WIN_L2R|WIN_SAV,0,0,"Secure Inbound Directory"
,cfg.secure_inbound,sizeof(cfg.secure_inbound)-1
,K_EDIT);
break;
case 2:
"~ Outbound Directory ~\n\n"
"This is the path where your FTN mailer will look for, and where SBBSecho\n"
"will place, outgoing message bundles and packets.\n"
"\n"
"In Binkley-Style Outbound mode, this serves as the base directory\n"
"name for special foreign zone and point destination nodes as well."
break;
case 3:
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
"~ Area File ~\n\n"
"This is the path of the file SBBSecho will use as your primary\n"
"list of FidoNet-style message areas (default is `data/areas.bbs`).\n"
"\n"
"Each line in the file defines an FTN message area (echo) of the format:\n"
"\n"
" <`code`> <`tag`> [[`link`] [`link`] [...]]\n"
"\n"
"Each field is separated by one or more white-space characters:\n"
"\n"
" `<code>` is the Synchronet `internal code` for the local sub-board\n"
" `<tag>` is the network's agreed-upon `echo tag` for the message area\n"
" `[link]` is an `FTN address` to send and receive messages for this area\n"
" (there may be many linked nodes for each area)\n"
" (often your FTN uplink/hub may be the only linked node)\n"
"\n"
"Example Area Line:\n"
"\n"
" `FIDO_BBS_CARN BBS_CARNIVAL 1:218/700`\n"
"\n"
"Notes:\n"
"\n"
" `*` Only the `<code>` and `<tag>` fields are required\n"
" `*` The `<code>` and `<tag>` fields are case in-sensitive\n"
" `*` The `[link]` fields must be 2D, 3D, or 4D FidoNet-style node addresses\n"
" `*` The '`<`' and '`>`', '`[`' and '`]`' characters are not part of the syntax\n"
" `*` Lines beginning with a semicolon (`;`) are ignored (i.e. comments)\n"
" `*` Leading white-space characters are ignored\n"
" `*` Blank lines are ignored\n"
" `*` A `<tag>` value of `*` indicates a `bad echo` (unknown) area\n"
" `*` A `<code>` value of `P` indicates a pass-through message area\n"
" `*` This file may be import/exported to/from your `Message Areas` in `SCFG`\n"
" `*` This file may be remotely modified by authorized nodes using `AreaFix`\n"
"\n"
"Default value is `" DEFAULT_AREA_FILE "`."
break;
case 4:
"~ Bad Area File ~\n\n"
"This is the path of the file SBBSecho will use to record the names\n"
"(echo tags) and descriptions of FTN message areas (echoes) that your\n"
"system has received EchoMail for, but does not carry locally. The\n"
"default path/filename is `" DEFAULT_BAD_AREA_FILE "`.\n"
"\n"
"Notes:\n"
"\n"
" `*` The descriptions of the areas will only be included if the\n"
" corresponding echo tags can be located in one of your configured\n"
" `EchoLists`.\n"
"\n"
" `*` The format of the file is the same as `BACKBONE.NA` and suitable for\n"
" importing into a Synchronet Message Group using `SCFG`.\n"
"\n"
" `*` SBBSecho will automatically sort and maintain this list, removing\n"
" areas if they are added to your configuration (`SCFG->Message Areas`)\n"
" and your `Area File`.\n"
,cfg.badareafile,sizeof(cfg.badareafile)-1
,K_EDIT);
break;
case 5:
uifc.helpbuf=
"~ Log File ~\n\n"
"This is the path of the file SBBSecho will use to log information each\n"
"time it is run (default is `" DEFAULT_LOG_FILE "`)."
;
uifc.helpbuf=
"~ EchoStats File ~\n\n"
"This is the path of the file SBBSecho will use to track statistics for\n"
"EchoMail message areas (default is `" DEFAULT_ECHOSTATS_FILE "`)."
;
uifc.input(WIN_L2R|WIN_SAV,0,0,"EchoStats File"
,cfg.echostats,sizeof(cfg.echostats)-1
,K_EDIT);
case 7:
uifc.helpbuf=
"~ Temporary File Directory ~\n\n"
"This is the directory where SBBSecho will store temporary files that\n"
"it creates and uses during its run-time (default is `" DEFAULT_TEMP_DIR "`)."
;
,cfg.temp_dir,sizeof(cfg.temp_dir)-1
,K_EDIT);
case 8:
uifc.helpbuf=
"~ Outgoing Semaphore File ~\n\n"
"This is an optional file to create/touch whenever there are new outbound\n"
"files created or updated by SBBSecho."
;
uifc.input(WIN_L2R|WIN_SAV,0,0,"Outgoing Sem File"
,cfg.outgoing_sem,sizeof(cfg.outgoing_sem)-1
,K_EDIT);
}
"~ NetMail Settings ~\n"
"\n"
"`Sysop Aliases` is a comma-separated list of names by which the sysop\n"
" (user #1) may receive NetMail messages, in addition to the alias\n"
" and real name associated with their BBS user account.\n"
" This setting defaults to just '`SYSOP`'.\n"
"\n"
"`Default Recipient` is the name of the user account you wish to receive\n"
" inbound NetMail messages that have been addressed to an unrecognized\n"
" user name or alias.\n"
"\n"
"`Fuzzy Zone Operation` when set to `Yes`, if SBBSecho receives an inbound\n"
" netmail with `NO` international zone information, it will compare the\n"
" net/node of the destination to the net/node information in your AKAs\n"
" and assume the (source and destination) zone of a matching AKA.\n"
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
" This setting defaults to `No`.\n"
"\n"
"`Kill/Ignore Empty NetMail Messages` will instruct SBBSecho to simply\n"
" discard (not import or export) NetMail messages without any body.\n"
" This setting defaults to `Yes`.\n"
"\n"
"`Delete Processed NetMail Messages` will instruct SBBSecho to delete\n"
" NetMail messages/files after they have been sent or imported.\n"
" When set to `No`, SBBSecho will mark them as Sent or Received instead.\n"
" This setting defaults to `Yes`.\n"
"\n"
"`Ignore NetMail Destination Address` will instruct SBBSecho to treat\n"
" all NetMail as though it is destined for one of your systems's FTN\n"
" addresses (AKAs) and potentially import it.\n"
" This setting defaults to `No`.\n"
"\n"
"`Ignore Netmail 'Sent' Attribute` will instruct SBBSecho to export\n"
" NetMail messages even when their 'Sent' attribute flag is set.\n"
" This setting `should not` be set to `Yes` when `Delete NetMail` is\n"
" disabled.\n"
" This setting defaults to `No`.\n"
"\n"
"`Ignore Netmail 'KillSent' Attribute` will instruct SBBSecho to ignore\n"
" this attribute flag and will `not` delete Sent NetMail.\n"
" This setting defaults to `No`.\n"
"\n"
"`Ignore Netmail 'Received' Attribute` will instruct SBBSecho to import\n"
" NetMail messages even when their 'Received' attribute flag is set.\n"
" This setting defaults to `No`.\n"
"\n"
"`Ignore NetMail 'Local' Attribute` will instruct SBBSecho to import\n"
" NetMail messages even when their 'Local' attribute flag is set.\n"
" This setting defaults to `No`.\n"
"\n"
"`Maximum Age of Imported NetMail` allows you to optionally set an age\n"
" limit of NetMail messages that may be imported.\n"
" This setting defaults to `None` (no maximum age).\n"
strListCombine(cfg.sysop_alias_list, sysop_aliases, sizeof(sysop_aliases)-1, ",");
snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%s", "Sysop Aliases",sysop_aliases);
snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%s", "Default Recipient"
,cfg.default_recipient);
snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Fuzzy Zone Operation"
,cfg.fuzzy_zone ? "Yes":"No");
snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Kill/Ignore Empty NetMail "
"Messages",cfg.kill_empty_netmail ? "Yes":"No");
snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Delete Processed NetMail"
,cfg.delete_netmail ? "Yes":"No");
snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail Destination Address"
,cfg.ignore_netmail_dest_addr ? "Yes" : "No");
snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail 'Sent' Attribute"
,cfg.ignore_netmail_sent_attr ? "Yes" : "No");
snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail 'KillSent' Attribute"
,cfg.ignore_netmail_kill_attr ? "Yes" : "No");
snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail 'Received' Attribute"
,cfg.ignore_netmail_recv_attr ? "Yes" : "No");
snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail 'Local' Attribute"
,cfg.ignore_netmail_local_attr ? "Yes" : "No");
if(cfg.max_netmail_age)
snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%s","Maximum Age of Imported NetMail" , str);
j=uifc.list(WIN_ACT|WIN_SAV,0,0,0,&netmail_opt,0,"NetMail Settings",opt);
if(j==-1)
break;
switch(j) {
case 0:
"~ Sysop Aliases ~\n\n"
"This is a comma-separated list of additional `To` names that the sysop\n"
"(user #1) can receive netmail by. When specifying multiple aliases,\n"
"they must be separated by a single comma and no extra white-space\n"
"(e.g. \"SYSOP,COORDINATOR\"). The default value is just `SYSOP`.\n";
if(uifc.input(WIN_MID|WIN_BOT|WIN_SAV,0,0,"Sysop Aliases (comma separated)"
,sysop_aliases
,sizeof(sysop_aliases)-1,K_EDIT|K_UPPER) >= 0) {
strListFree(&cfg.sysop_alias_list);
cfg.sysop_alias_list = strListSplit(NULL, sysop_aliases, ",");
}
uifc.input(WIN_MID|WIN_SAV,0,0,"Default Recipient"
,cfg.default_recipient, sizeof(cfg.default_recipient)-1
,K_EDIT|K_UPPER);
k = !cfg.fuzzy_zone;
switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
,"Fuzzy Zone Operation",uifcYesNoOpts)) {
case 0: cfg.fuzzy_zone = true; break;
case 1: cfg.fuzzy_zone = false; break;
}
k = !cfg.kill_empty_netmail;
switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
,"Delete Empty NetMail",uifcYesNoOpts)) {
case 0: cfg.kill_empty_netmail = true; break;
case 1: cfg.kill_empty_netmail = false; break;
}
k = !cfg.delete_netmail;
switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
,"Delete Processed NetMail",uifcYesNoOpts)) {
case 0: cfg.delete_netmail = true; break;
case 1: cfg.delete_netmail = false; break;
}
break;
case 5:
k = !cfg.ignore_netmail_dest_addr;
switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
,"Ignore NetMail Destination Address",uifcYesNoOpts)) {
case 0: cfg.ignore_netmail_dest_addr = true; break;
case 1: cfg.ignore_netmail_dest_addr = false; break;
}
break;
case 6:
k = !cfg.ignore_netmail_sent_attr;
switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
,"Ignore NetMail 'Sent' Attribute",uifcYesNoOpts)) {
case 0: cfg.ignore_netmail_sent_attr = true; break;
case 1: cfg.ignore_netmail_sent_attr = false; break;
}
break;
case 7:
k = !cfg.ignore_netmail_kill_attr;
switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
,"Ignore NetMail 'KillSent' Attribute",uifcYesNoOpts)) {
case 0: cfg.ignore_netmail_kill_attr = true; break;
case 1: cfg.ignore_netmail_kill_attr = false; break;
}
break;
case 8:
k = !cfg.ignore_netmail_recv_attr;
switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
,"Ignore NetMail 'Received' Attribute",uifcYesNoOpts)) {
case 0: cfg.ignore_netmail_recv_attr = true; break;
case 1: cfg.ignore_netmail_recv_attr = false; break;
}
break;
k = !cfg.ignore_netmail_local_attr;
switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
,"Ignore NetMail 'Local' Attribute",uifcYesNoOpts)) {
case 0: cfg.ignore_netmail_local_attr = true; break;
case 1: cfg.ignore_netmail_local_attr = false; break;
}
break;
"~ Maximum Age of Imported NetMail ~\n\n"
"Maximum age of NetMail that may be imported. The age is based\n"
"on the date supplied in the message header and may be incorrect in some\n"
"conditions (e.g. erroneous software or incorrect system date).\n"
"Set this value to `0` to disable this feature (no maximum age imposed)."
;
if(cfg.max_netmail_age)
if(uifc.input(WIN_MID|WIN_BOT|WIN_SAV,0,0,"Maximum NetMail Age"
,str, 10, K_EDIT) >= 0)
cfg.max_netmail_age = (ulong)parse_duration(str);
break;
}
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
"~ EchoMail Settings ~\n"
"\n"
"`Area Manager` is the BBS user name or alias to notify (via email) of\n"
" AreaFix activities and errors. This setting defaults to `SYSOP`.\n"
"\n"
"`Maximum Packet Size` is the largest packet file size that SBBSecho will\n"
" normally create (in bytes).\n"
" This settings defaults to `250K` (250 Kilobytes, or 256,000 bytes).\n"
"\n"
"`Maximum Bundle Size` is the largest bundle file size that SBBSecho will\n"
" normally create (in bytes).\n"
" This settings defaults to `250K` (250 Kilobytes, or 256,000 bytes).\n"
"\n"
"`Secure Operation` tells SBBSecho to check the Area File (e.g. areas.bbs)\n"
" to insure that the packet origin (FTN address) of EchoMail messages\n"
" is already linked to the EchoMail area where the message was posted.\n"
" This setting defaults to `No`.\n"
"\n"
"`Notify Users of Received EchoMail` tells SBBSecho to send telegrams\n"
" (short messages) to BBS users when EchoMail addressed to their name\n"
" or alias has been imported into a message base that the user has\n"
" access to read.\n"
"\n"
"`Convert Existing Tear Lines` tells SBBSecho to convert any tear lines\n"
" (`---`) existing in outgoing EchoMail message text to `===`.\n"
"`Automatically Add New Subs to Area List`, when enabled, instructs\n"
" SBBSecho to detect newly added Sub-boards in any Message Groups that\n"
" are listed with a `Linked Node` as their hub/uplink and add those new\n"
" Sub-boards as new areas to your Area List and optionally, Area File.\n"
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
"\n"
"`Allow Nodes to Add Areas from Area File` when set to `Yes` allows linked\n"
" nodes to add areas listed in your Area File (e.g. `areas.bbs`).\n"
" When set to `No`, only areas found in one or more `EchoLists` may be\n"
" added via AreaFix, provided the linked node has access.\n"
" This setting defaults to `Yes`.\n"
"\n"
"`Maximum Backups to Maintain of Area File` defines the number of backup\n"
" versions SBBSecho will maintain of your Area File (e.g. `areas.bbs`).\n"
"\n"
"`Circular Path Detection` when `Enabled` will cause SBBSecho, during\n"
" EchoMail import, to check the PATH kludge lines for any of the\n"
" system's AKAs and if found (indicating a message loop), not import\n"
" the message.\n"
"\n"
"`Relay Filtered Messages` controls whether or not incoming messages that\n"
" have been filtered (e.g. due to maximum message age restrictions)\n"
" are to be forwarded to downlinks.\n"
"\n"
"`Outbound Bundle Attachments` may be either `Deleted` (killed) or `Truncated`\n"
" (changed to 0-bytes in length) after being sent by your mailer.\n"
" This only controls the bundle prefix that is written to the FLO\n"
" files (`#` for truncate, `^` for delete).\n"
"\n"
"`Zone Blind SEEN-BY and PATH Lines` when `Enabled` will cause SBBSecho\n"
" to assume that node numbers are not duplicated across zones and\n"
" that a net/node combination in either of these Kludge lines should\n"
" be used to identify a specific node regardless of which zone that\n"
" node is located (thus breaking the rules of FidoNet 3D addressing).\n"
"\n"
"`Maximum Age of Imported EchoMail` allows you to optionally set an age\n"
" limit of EchoMail messages that may be imported.\n"
" This setting defaults to `60 days`.\n"
"\n"
"`Require Area-Linked Nodes to be Configured` allows you to specify\n"
" whether or not each linked node in the area file must be configured\n"
" in the `Linked Nodes` list.\n"
snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s", "Area Manager",cfg.areamgr);
snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%luK","Maximum Packet Size"
,cfg.maxpktsize/1024UL);
snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%luK","Maximum Bundle Size"
,cfg.maxbdlsize/1024UL);
snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%-3.3s","Secure Operation"
,cfg.secure_echomail ? "Yes":"No");
snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%-3.3s","Notify Users of Received EchoMail"
,cfg.echomail_notify ? "Yes":"No");
snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%-3.3s","Convert Existing Tear Lines"
,cfg.convert_tear ? "Yes":"No");
snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Automatically Add New Subs "
"to Area List", cfg.auto_add_subs ? (cfg.auto_add_to_areafile ? "List/File":"List Only"):"No");
snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%-3.3s","Allow Nodes to Add Areas "
"from Area File",cfg.add_from_echolists_only ? "No":"Yes");
snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%u","Maximum Backups to Maintain of Area File"
,cfg.areafile_backups);
snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Circular Path Detection"
,cfg.check_path ? "Enabled" : "Disabled");
snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Relay Filtered Messages"
,cfg.relay_filtered_msgs ? "Yes" : "No");
snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Outbound Bundle Attachments"
,cfg.trunc_bundles ? "Truncate" : "Delete");
if(cfg.zone_blind)
sprintf(str,"Zones 1-%u", cfg.zone_blind_threshold);
else
SAFECOPY(str,"Disabled");
snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Zone Blind SEEN-BY and PATH Lines", str);
if(cfg.max_echomail_age)
snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Maximum Age of Imported EchoMail", str);
snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Require Area-Linked Nodes to be Configured"
,cfg.require_linked_node_cfg ? "Yes" : "No");
j=uifc.list(WIN_ACT|WIN_MID|WIN_SAV,0,0,0,&echomail_opt,0,"EchoMail Settings",opt);
break;
case 0:
"Local user to notify of AreaFix activity and errors.\n";
uifc.input(WIN_MID|WIN_BOT|WIN_SAV,0,0,"Area Manager (user name or alias)"
,cfg.areamgr
,LEN_ALIAS,K_EDIT);
break;
case 1:
"~ Maximum Packet Size ~\n\n"
"This is the maximum file size that SBBSecho will create when placing\n"
"outgoing messages into packets. The default max size is 250 Kilobytes.\n";
sprintf(str,"%lu",cfg.maxpktsize);
uifc.input(WIN_MID|WIN_BOT|WIN_SAV,0,0,"Maximum Packet Size (in Bytes)",str
,9,K_EDIT|K_NUMBER);
cfg.maxpktsize=atol(str);
case 2:
"~ Maximum Bundle Size ~\n\n"
"This is the maximum file size that SBBSecho will create when placing\n"
"outgoing packets into bundles. The default max size is 250 Kilobytes.\n";
sprintf(str,"%lu",cfg.maxbdlsize);
uifc.input(WIN_MID|WIN_BOT|WIN_SAV,0,0,"Maximum Bundle Size (in Bytes)",str
,9,K_EDIT|K_NUMBER);
cfg.maxbdlsize=atol(str);
break;
case 3:
k = !cfg.secure_echomail;
switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
,"Secure Operation",uifcYesNoOpts)) {
case 0: cfg.secure_echomail = true; break;
case 1: cfg.secure_echomail = false; break;
}
case 4:
k = !cfg.echomail_notify;
switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
,"Notify Users",uifcYesNoOpts)) {
case 0: cfg.echomail_notify = true; break;
case 1: cfg.echomail_notify = false; break;
}
break;
case 5:
k = !cfg.convert_tear;
switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
,"Convert Tear Lines",uifcYesNoOpts)) {
case 0: cfg.convert_tear = true; break;
case 1: cfg.convert_tear = false; break;
}
case 6:
i=0;
strncpy(opt[i++], "Area List (memory) Only", MAX_OPLN-1);
strncpy(opt[i++], "Area List and Area File", MAX_OPLN-1);
strncpy(opt[i++], "No", MAX_OPLN-1);
opt[i][0] = 0;
if(!cfg.auto_add_subs)
k = 2;
else if(cfg.auto_add_to_areafile)
k = 1;
else
k = 0;
,"Automatically Add New Sub-boards to Area List",opt)) {
case 0: cfg.auto_add_subs = true; cfg.auto_add_to_areafile = false; break;
case 1: cfg.auto_add_subs = true; cfg.auto_add_to_areafile = true; break;
case 2: cfg.auto_add_subs = false; break;
case 7: