Skip to content
Snippets Groups Projects
echocfg.c 102 KiB
Newer Older
					while(1) {
	uifc.helpbuf=
rswindell's avatar
rswindell committed
	"~ Linked Node Settings ~\n"
	"\n"
	"`Address` is the FidoNet-style address in the Zone:Net/Node (3D) or\n"
	"    Zone:Net/Node.Point (4D) format. The wildcard word '`ALL`' may be used\n"
	"    in place of one of the fields to create a node configuration which\n"
	"    will apply to *all* nodes matching that address pattern.\n"
	"    e.g. '`1:ALL`' matches all nodes within FidoNet Zone 1.\n"
	"\n"
	"`Name` is name of the system operator of the configured node. This is used\n"
rswindell's avatar
rswindell committed
	"    as the destination name for AreaFix Notification NetMail messages.\n"
	"\n"
rswindell's avatar
rswindell committed
	"`Comment` is a note to yourself about this node. Setting this to the\n"
rswindell's avatar
rswindell committed
	"    BBS name or official FidoNet title corresponding with the configured\n"
	"    node can be a helpful reminder to yourself later.\n"
rswindell's avatar
rswindell committed
	"\n"
	"`Archive Type` is the name of an archive type corresponding with one of\n"
	"    your configured archive types or '`None`'.  This archive type will\n"
	"    be used when creating EchoMail bundles or if `None`, raw/uncompressed\n"
	"    EchoMail packets will be sent to this node.\n"
	"    This setting may be managed by the node using AreaFix requests.\n"
	"\n"
	"`Packet Type` is the type of outbound packet generated for this node.\n"
	"    Incoming packet types are automatically detected from among the list\n"
	"    of supported packet types (`2`, `2.2`, `2e`, and `2+`).\n"
	"    The default outbound packet type is `2+`.\n"
	"\n"
	"`Packet Password` is an optional password that may be added to outbound\n"
	"    packets for this node.  Incoming packet passwords are compared with\n"
	"    this password value.  If this password is blank/empty and `Strict\n"
	"    Packet Passwords` are enabled, then incoming packets from this node\n"
	"    must also have no password.  Packet passwords are case insensitive.\n"
	"    This setting may be managed by the node using AreaFix requests.\n"
	"\n"
	"`Session Password` is the password that will be used for authenticated\n"
	"    BinkP sessions with this node. Session passwords are case sensitive.\n"
	"    This password is only used by BinkIT (if you choose to use it).\n"
	"\n"
rswindell's avatar
rswindell committed
	"`TIC File Password` is an optional password that may be configured here\n"
	"    (and in your `sbbsecho.ini` file) for use by `tickit.js` when creating\n"
rswindell's avatar
rswindell committed
	"    or authenticating `.TIC` files.\n"
	"    This setting may be managed by the node using AreaFix requests.\n"
	"\n"
rswindell's avatar
rswindell committed
	"`AreaFix Support` is a toggle that determines whether or not this node\n"
	"    may send AreaFix NetMail requests to your system to perform remote\n"
rswindell's avatar
rswindell committed
	"\n"
	"`AreaFix Password` is an optional password used to authenticate inbound\n"
	"    AreaFix NetMail requests (Remote Area Management) from this node.\n"
rswindell's avatar
rswindell committed
	"    AreaFix Passwords are case insensitive.\n"
	"    This setting may be managed by the node using AreaFix requests.\n"
	"\n"
rswindell's avatar
rswindell committed
	"`EchoList Keys` is a list of keys which enable AreaFix access to one or\n"
rswindell's avatar
rswindell committed
	"    more additional EchoLists.\n"
	"\n"
	"`Status` is the default mode for sending mail to this node: `Normal`, `Hold`\n"
	"    (wait for pickup) or `Crash` (immediate).\n"
	"\n"
	"`Direct` determines whether to connect to this node directly (whenever\n"
	"    possible) when sending mail to this node.\n"
	"\n"
	"`Passive` is used to temporarily disable (pause) the packing and sending\n"
	"    of EchoMail for this node.  The opposite of Passive is `Active`.\n"
	"    This setting may be managed by the node using AreaFix requests.\n"
	"\n"
	"`Send Notify List` is used to flag nodes that you want notified via\n"
	"    NetMail of their current AreaFix settings whenever SBBSecho is run\n"
	"    with the '`G`' option.\n"
	"\n"
	"`Uplink for Message Groups` is an optional list of Message Groups (short\n"
	"    names) for which this node is a hub/uplink for your system.  This\n"
	"    setting is used in combination with the `Auto Add Sub-boards` feature\n"
	"    to auto-link hubs with the newly added areas in your Area File.\n"
	"\n"
rswindell's avatar
rswindell committed
	"`Local Address` is an optional local system address (AKA) to use when\n"
	"    sending packets to this node.  When a Local Address is not specified\n"
	"    SBBSecho will automatically choose the local address that matches\n"
	"    the destination address (zone and net number) the closest\n"
	"    (Best Match).\n"
	"\n"
rswindell's avatar
rswindell committed
	"`Route To` is only used in Binkley-Style Outbound (BSO/FLO) operating\n"
	"    mode and is used to set the FTN address to route mail for this node.\n"
	"\n"
	"`Inbox Directory` is only used in BSO operating mode and is an optional\n"
	"    alternate directory to search for incoming files from this node\n"
	"    (e.g. used in combination with BinkD's ibox setting).\n"
	"\n"
	"`Outbox Directory` is only used in BSO operating mode and is an optional\n"
	"    alternate directory to place outbound files for this node (e.g. used\n"
	"    in combination with BinkD's obox setting).\n"
	"\n"
	"`BinkP Settings` are settings specific to BinkP/BinkIT mailer operation.\n"
rswindell's avatar
rswindell committed
	;
rswindell's avatar
rswindell committed
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Address"
							,faddrtoa(&cfg.nodecfg[i].addr));
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Domain"
							,cfg.nodecfg[i].domain);
rswindell's avatar
rswindell committed
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Name"
							,cfg.nodecfg[i].name);
rswindell's avatar
rswindell committed
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Comment"
							,cfg.nodecfg[i].comment);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Archive Type"
							,cfg.nodecfg[i].archive ==  SBBSECHO_ARCHIVE_NONE ?
							"None":cfg.nodecfg[i].archive->name);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Packet Type"
							,pktTypeStringList[cfg.nodecfg[i].pkt_type]);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Packet Password"
							,cfg.nodecfg[i].pktpwd);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Session Password"
							,cfg.nodecfg[i].sesspwd);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","TIC File Password"
							,cfg.nodecfg[i].ticpwd);
rswindell's avatar
rswindell committed
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","AreaFix Support"
							,cfg.nodecfg[i].areafix ? "Yes" : "No");
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","AreaFix Password"
							,cfg.nodecfg[i].password);
rswindell's avatar
rswindell committed
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","EchoList Keys"
rswindell's avatar
rswindell committed
							,strListCombine(cfg.nodecfg[i].keys,str,sizeof(str),","));
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Status"
							,mailStatusStringList[cfg.nodecfg[i].status]);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Direct"
							,cfg.nodecfg[i].direct ? "Yes":"No");
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Passive"
							,cfg.nodecfg[i].passive ? "Yes":"No");
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Send Notify List"
							,cfg.nodecfg[i].send_notify ? "Yes" : "No");
rswindell's avatar
rswindell committed
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Uplink for Message Groups"
							,strListCombine(cfg.nodecfg[i].grphub,str,sizeof(str),","));
rswindell's avatar
rswindell committed
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Local Address (AKA)"
							,cfg.nodecfg[i].local_addr.zone
							? faddrtoa(&cfg.nodecfg[i].local_addr) : "Best Match");
rswindell's avatar
rswindell committed
						if(cfg.flo_mailer) {
							snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Route To"
								,cfg.nodecfg[i].route.zone
rswindell's avatar
rswindell committed
								? faddrtoa(&cfg.nodecfg[i].route) : "Disabled");
							if(!faddr_contains_wildcard(&cfg.nodecfg[i].addr)) {
								snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s", "Inbox Directory", cfg.nodecfg[i].inbox);
								snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s", "Outbox Directory", cfg.nodecfg[i].outbox);
								strcpy(opt[j++], "BinkP Settings...");
rswindell's avatar
rswindell committed
						}
rswindell's avatar
rswindell committed
						SAFEPRINTF(str, "Linked Node - %s"
rswindell's avatar
rswindell committed
							,cfg.nodecfg[i].name[0] ? cfg.nodecfg[i].name : faddrtoa(&cfg.nodecfg[i].addr));
						uifc_winmode_t wmode = WIN_MID|WIN_ACT|WIN_SAV|WIN_EXTKEYS;
						if(i > 0)
							wmode |= WIN_LEFTKEY;
						if(i + 1 < (int)cfg.nodecfgs)
							wmode |= WIN_RIGHTKEY;
						k=uifc.list(wmode,0,0,72,&nodeop,&nodeopbar,str,opt);
						if(k==-1)
							break;
						switch(k) {
							case -CIO_KEY_LEFT-2:
								if(i > 0)
									i--;
								break;
							case -CIO_KEY_RIGHT-2:
								if(i + 1 < (int)cfg.nodecfgs)
rswindell's avatar
rswindell committed
							case __COUNTER__:
rswindell's avatar
rswindell committed
	"~ Address ~\n\n"
	"This is the FidoNet style address of this linked node.\n";
								SAFECOPY(str,faddrtoa(&cfg.nodecfg[i].addr));
rswindell's avatar
rswindell committed
								if(uifc.input(WIN_MID|WIN_SAV,0,0
									,"Node Address (ALL wildcard allowed)",str
rswindell's avatar
rswindell committed
									,25,K_EDIT|K_UPPER)>0)
									cfg.nodecfg[i].addr=atofaddr(str);
rswindell's avatar
rswindell committed
							case __COUNTER__:
	uifc.helpbuf=
	"~ Domain ~\n\n"
	"This is the domain portion of the 5D FTN address of this linked node\n"
	"(e.g. '`fidonet`').  FTN domains are limited to 8 characters and must not\n"
	"contain the characters '@' or '.'.\n"
	"\n"
	"This setting is currently not used by SBBSecho but is available and\n"
	"managed here for 5D address use by BinkIT.";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"Domain"
									,cfg.nodecfg[i].domain, sizeof(cfg.nodecfg[i].domain)-1
									,K_EDIT);
								break;
							case __COUNTER__:
	uifc.helpbuf=
rswindell's avatar
rswindell committed
	"~ Name ~\n\n"
	"This is an optional NetMail destination name for the node (e.g. the sysop's name).\n"
	"This is used for AreaFix Notification NetMail messages.\n";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"Name"
									,cfg.nodecfg[i].name,sizeof(cfg.nodecfg[i].name)-1
									,K_EDIT);
								break;
							case __COUNTER__:
rswindell's avatar
rswindell committed
	"~ Comment ~\n\n"
	"This is an optional comment for the node (e.g. the sysop's name).\n"
	"This is used for informational purposes only.\n";
rswindell's avatar
rswindell committed
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"Comment"
									,cfg.nodecfg[i].comment,sizeof(cfg.nodecfg[i].comment)-1
									,K_EDIT);
								break;
rswindell's avatar
rswindell committed
							case __COUNTER__:
rswindell's avatar
rswindell committed
	uifc.helpbuf=
rswindell's avatar
rswindell committed
	"~ Archive Type ~\n\n"
	"This is the archive type that will be used for compressing packets\n"
	"into archive bundles for this node.\n";
rswindell's avatar
rswindell committed
								int cur=cfg.arcdefs;
								for(u=0;u<cfg.arcdefs;u++) {
									if(cfg.nodecfg[i].archive == &cfg.arcdef[u])
										cur=u;
									strcpy(opt[u],cfg.arcdef[u].name);
rswindell's avatar
rswindell committed
								}
								strcpy(opt[u++],"None");
								opt[u][0]=0;
rswindell's avatar
rswindell committed
								k=uifc.list(WIN_RHT|WIN_SAV,0,0,0,&cur,0
									,"Archive Type",opt);
								if(k==-1)
									break;
								if((unsigned)k>=cfg.arcdefs)
rswindell's avatar
rswindell committed
									cfg.nodecfg[i].archive = SBBSECHO_ARCHIVE_NONE;
rswindell's avatar
rswindell committed
									cfg.nodecfg[i].archive = &cfg.arcdef[k];
								uifc.changes=TRUE;
rswindell's avatar
rswindell committed
							case __COUNTER__:
rswindell's avatar
rswindell committed
	"~ Packet Type ~\n\n"
	"This is the packet header type that will be used in mail packets\n"
	"created for this node.  SBBSecho defaults to creating `Type-2+` packets.\n"
	"\n"
	"`Type-2  ` packets are defined in FTS-0001.16 (Stone Age)\n"
	"`Type-2e ` packets are defined in FSC-0039.04 (Sometimes called 2+)\n"
	"`Type-2+ ` packets are defined in FSC-0048.02 (4D address support)\n"
	"`Type-2.2` packets are defined in FSC-0045.01 (5D address support)\n"
								j=cfg.nodecfg[i].pkt_type;
								k=uifc.list(WIN_RHT|WIN_SAV,0,0,0,&j,0,"Packet Type"
rswindell's avatar
rswindell committed
									,pktTypeStringList);
								if(k==-1)
									break;
								cfg.nodecfg[i].pkt_type=k;
rswindell's avatar
rswindell committed
								uifc.changes=TRUE;
rswindell's avatar
rswindell committed
							case __COUNTER__:
rswindell's avatar
rswindell committed
	"~ Packet Password ~\n\n"
	"This is an optional password that SBBSecho will place into packets\n"
	"destined for this node.\n"
	"\n"
	"Packet passwords are `case-insensitive`";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"Packet Password (optional)"
rswindell's avatar
rswindell committed
									,cfg.nodecfg[i].pktpwd,sizeof(cfg.nodecfg[i].pktpwd)-1
									,K_EDIT|K_UPPER);
rswindell's avatar
rswindell committed
							case __COUNTER__:
	"~ Session Password ~\n\n"
	"This is an optional password that BinkIT will use for authenticated\n"
	"BinkP sessions with this node.\n"
	"\n"
	"Session passwords are `case-sensitive`";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"Session Password"
									,cfg.nodecfg[i].sesspwd,sizeof(cfg.nodecfg[i].sesspwd)-1
									,K_EDIT);
								break;
							case __COUNTER__:
	uifc.helpbuf=
rswindell's avatar
rswindell committed
	"~ TIC File Password ~\n\n"
	"This is an optional password that tickit.js will use for creating\n"
rswindell's avatar
rswindell committed
	"and authenticating `.TIC` files to/from this node.\n";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"TIC File Password (optional)"
									,cfg.nodecfg[i].ticpwd,sizeof(cfg.nodecfg[i].ticpwd)-1
									,K_EDIT|K_UPPER);
								break;
rswindell's avatar
rswindell committed
							case __COUNTER__:
	uifc.helpbuf=
	"~ AreaFix Support ~\n\n"
rswindell's avatar
rswindell committed
	"If you wish for this node to be able to remotely query or change their\n"
	"configuration via `AreaFix` NetMail messages, set to option to `Yes`.\n";
rswindell's avatar
rswindell committed
								k = cfg.nodecfg[i].areafix;
								switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
									,"AreaFix Support",uifcYesNoOpts)) {
									case 0:	cfg.nodecfg[i].areafix = true;	uifc.changes=TRUE; break;
									case 1:	cfg.nodecfg[i].areafix = false;	uifc.changes=TRUE; break;
								}
								break;
							case __COUNTER__:
rswindell's avatar
rswindell committed
	"~ AreaFix Password ~\n\n"
	"This is the password that will be used by this node when doing remote\n"
	"AreaManager / AreaFix functions.\n";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"AreaFix Password"
rswindell's avatar
rswindell committed
									,cfg.nodecfg[i].password,sizeof(cfg.nodecfg[i].password)-1
									,K_EDIT|K_UPPER);
rswindell's avatar
rswindell committed
							case __COUNTER__:
rswindell's avatar
rswindell committed
	"~ EchoList Keys ~\n\n"
rswindell's avatar
rswindell committed
	"These are a named-keys to be given to this node allowing access to one\n"
	"or more of the configured `EchoLists` for remote area-add requests.\n";
rswindell's avatar
rswindell committed
									for(j=0; cfg.nodecfg[i].keys!=NULL && cfg.nodecfg[i].keys[j]!=NULL ;j++)
										strcpy(opt[j],cfg.nodecfg[i].keys[j]);
									opt[j][0]=0;
									k=uifc.list(WIN_SAV|WIN_INS|WIN_DEL|WIN_ACT|
										WIN_XTR|WIN_INSACT|WIN_DELACT|WIN_RHT
rswindell's avatar
rswindell committed
										,0,0,0,&k,0,"EchoList Keys",opt);
									if(k==-1)
										break;
									if((k&MSK_ON)==MSK_INS) {
										k&=MSK_OFF;
										if(uifc.input(WIN_MID|WIN_SAV,0,0
rswindell's avatar
rswindell committed
											,"EchoList Key",str,SBBSECHO_MAX_KEY_LEN
rswindell's avatar
rswindell committed
											,K_UPPER)<1)
rswindell's avatar
rswindell committed
										strListInsert(&cfg.nodecfg[i].keys, str, k);
										uifc.changes=TRUE;
rswindell's avatar
rswindell committed
										continue;

									if((k&MSK_ON)==MSK_DEL) {
										k&=MSK_OFF;
rswindell's avatar
rswindell committed
										strListRemove(&cfg.nodecfg[i].keys, k);
										uifc.changes=TRUE;
rswindell's avatar
rswindell committed
										continue;
rswindell's avatar
rswindell committed
									SAFECOPY(str,cfg.nodecfg[i].keys[k]);
rswindell's avatar
rswindell committed
									uifc.input(WIN_MID|WIN_SAV,0,0,"EchoList Key"
rswindell's avatar
rswindell committed
										,str,SBBSECHO_MAX_KEY_LEN,K_EDIT|K_UPPER);
									strListReplace(cfg.nodecfg[i].keys, k, str);
									uifc.changes=TRUE;
rswindell's avatar
rswindell committed
									continue;
rswindell's avatar
rswindell committed
							case __COUNTER__:
rswindell's avatar
rswindell committed
	uifc.helpbuf=
rswindell's avatar
rswindell committed
	"~ Mail Status ~\n\n"
	"Set the mail status for this node: `Normal`, `Hold`, or `Crash`.\n";
rswindell's avatar
rswindell committed
								j=cfg.nodecfg[i].status;
								k=uifc.list(WIN_RHT|WIN_SAV,0,0,0,&j,0,"Mail Status"
									,mailStatusStringList);
								if(k==-1)
									break;
								if(cfg.nodecfg[i].status!=k) {
									cfg.nodecfg[i].status=k;
									uifc.changes=TRUE;
								}
rswindell's avatar
rswindell committed
							case __COUNTER__:
rswindell's avatar
rswindell committed
								k = !cfg.nodecfg[i].direct;
								switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
									,"Direct Delivery",uifcYesNoOpts)) {
									case 0:	cfg.nodecfg[i].direct = true;	uifc.changes=TRUE; break;
									case 1:	cfg.nodecfg[i].direct = false;	uifc.changes=TRUE; break;
								}
rswindell's avatar
rswindell committed
							case __COUNTER__:
rswindell's avatar
rswindell committed
								k = !cfg.nodecfg[i].passive;
								switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
									,"Passive Node",uifcYesNoOpts)) {
									case 0:	cfg.nodecfg[i].passive = true;	uifc.changes=TRUE; break;
									case 1:	cfg.nodecfg[i].passive = false;	uifc.changes=TRUE; break;
								}
rswindell's avatar
rswindell committed
							case __COUNTER__:
rswindell's avatar
rswindell committed
								k = !cfg.nodecfg[i].send_notify;
								switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
									,"Send AreaFix Notifications",uifcYesNoOpts)) {
									case 0:	cfg.nodecfg[i].send_notify = true;	uifc.changes=TRUE; break;
									case 1:	cfg.nodecfg[i].send_notify = false;	uifc.changes=TRUE; break;
								}
								break;
rswindell's avatar
rswindell committed
							case __COUNTER__:
rswindell's avatar
rswindell committed
	"~ Uplink for Message Groups ~\n\n"
	"These are Message Group short names (as configured in SCFG) for which\n"
	"this linked node is your system's uplink (hub).\n"
rswindell's avatar
rswindell committed
	"\n"
	"Use of this setting allows your hub to be automatically linked with new\n"
	"areas when new Sub-boards (within a listed group) are auto-added to the\n"
	"Area File."
	;
								while(1) {
									for(j=0; cfg.nodecfg[i].grphub!=NULL && cfg.nodecfg[i].grphub[j]!=NULL ;j++)
										strcpy(opt[j],cfg.nodecfg[i].grphub[j]);
									opt[j][0]=0;
									k=uifc.list(WIN_SAV|WIN_INS|WIN_DEL|WIN_ACT|
										WIN_XTR|WIN_INSACT|WIN_DELACT|WIN_RHT
										,0,0,0,&k,0,"Uplink for Message Groups",opt);
									if(k==-1)
										break;
									if((k&MSK_ON)==MSK_INS) {
										k&=MSK_OFF;
										if(uifc.input(WIN_MID|WIN_SAV,0,0
											,"Message Group (short name)",str,LEN_GSNAME
											,/* kmode: */0) < 1)
											continue;
										strListInsert(&cfg.nodecfg[i].grphub, str, k);
										uifc.changes=TRUE;
rswindell's avatar
rswindell committed
										continue;
rswindell's avatar
rswindell committed
									}

									if((k&MSK_ON)==MSK_DEL) {
										k&=MSK_OFF;
										strListRemove(&cfg.nodecfg[i].grphub, k);
										uifc.changes=TRUE;
rswindell's avatar
rswindell committed
										continue;
rswindell's avatar
rswindell committed
									}
									SAFECOPY(str,cfg.nodecfg[i].grphub[k]);
									uifc.input(WIN_MID|WIN_SAV,0,0,"Message Group (short name)"
										,str,LEN_GSNAME,K_EDIT|K_UPPER);
									strListReplace(cfg.nodecfg[i].grphub, k, str);
									uifc.changes=TRUE;
rswindell's avatar
rswindell committed
									continue;
								}
								break;
							case __COUNTER__:
								SAFECOPY(str,faddrtoa(&cfg.nodecfg[i].local_addr));
								if(uifc.input(WIN_MID|WIN_SAV,0,0
									,"Local Source Address (AKA) to Use",str
									,25,K_EDIT) >= 0) {
									if(str[0])
										cfg.nodecfg[i].local_addr = atofaddr(str);
									else
										cfg.nodecfg[i].local_addr.zone = 0;
									uifc.changes=TRUE;
rswindell's avatar
rswindell committed
								}
								break;
rswindell's avatar
rswindell committed
							case __COUNTER__:
rswindell's avatar
rswindell committed
	uifc.helpbuf=
	"~ Route To ~\n\n"
	"When using a BSO/FLO type mailer, this is the Fido address to route mail\n"
	"for this node(s) to.\n"
	"\n"
	"This option is normally only used with wildcard type node entries\n"
	"(e.g. `ALL`, or `1:ALL`, `2:ALL`, etc.) and is used to route non-direct\n"
	"NetMail packets to your uplink node (hub).\n";
								SAFECOPY(str,faddrtoa(&cfg.nodecfg[i].route));
rswindell's avatar
rswindell committed
								if(uifc.input(WIN_MID|WIN_SAV,0,0
									,"Node Address to Route To",str
rswindell's avatar
rswindell committed
									,25,K_EDIT) >= 0) {
									if(str[0])
										cfg.nodecfg[i].route=atofaddr(str);
									else
										cfg.nodecfg[i].route.zone=0;
rswindell's avatar
rswindell committed
									uifc.changes=TRUE;
								}
								break;
rswindell's avatar
rswindell committed
							case __COUNTER__:
rswindell's avatar
rswindell committed
								uifc.input(WIN_MID|WIN_SAV,0,0,"Inbound FileBox Directory"
									,cfg.nodecfg[i].inbox, sizeof(cfg.nodecfg[i].inbox)-1
									,K_EDIT);
								break;
rswindell's avatar
rswindell committed
							case __COUNTER__:
rswindell's avatar
rswindell committed
								uifc.input(WIN_MID|WIN_SAV,0,0,"Outbound FileBox Directory"
									,cfg.nodecfg[i].outbox, sizeof(cfg.nodecfg[i].outbox)-1
									,K_EDIT);
							case __COUNTER__:
								binkp_settings(&cfg.nodecfg[i]);
								break;
rswindell's avatar
rswindell committed
			case 5:	/* Paths and Filenames... */
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Non-secure Inbound Directory"
rswindell's avatar
rswindell committed
						,cfg.inbound[0] ? cfg.inbound : DEFAULT_INBOUND);
rswindell's avatar
rswindell committed
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Secure Inbound Directory"
rswindell's avatar
rswindell committed
						,cfg.secure_inbound[0] ? cfg.secure_inbound : DEFAULT_SECURE_INBOUND);
rswindell's avatar
rswindell committed
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Outbound Directory"
rswindell's avatar
rswindell committed
						,cfg.outbound[0] ? cfg.outbound : DEFAULT_OUTBOUND);
rswindell's avatar
rswindell committed
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Area File"
rswindell's avatar
rswindell committed
						,cfg.areafile[0] ? cfg.areafile : DEFAULT_AREA_FILE);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Bad Area File"
rswindell's avatar
rswindell committed
						,cfg.badareafile[0] ? cfg.badareafile : DEFAULT_BAD_AREA_FILE);
rswindell's avatar
rswindell committed
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Log File"
rswindell's avatar
rswindell committed
						,cfg.logfile[0] ? cfg.logfile : DEFAULT_LOG_FILE);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Echo Statistics File"
						,cfg.echostats[0] ? cfg.echostats : DEFAULT_ECHOSTATS_FILE);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Temporary File Directory"
rswindell's avatar
rswindell committed
						,cfg.temp_dir[0] ? cfg.temp_dir	: DEFAULT_TEMP_DIR);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Outgoing Semaphore File"
						,cfg.outgoing_sem);
rswindell's avatar
rswindell committed
					opt[i][0]=0;
rswindell's avatar
rswindell committed
						"~ Paths and Filenames ~\n\n"
						"From this menu you can configure the paths and filenames that SBBSecho\n"
						"will use during its operation (e.g. importing and exporting messages).\n";
					j=uifc.list(WIN_ACT|WIN_SAV,0,0,0,&path_opt,0
						,"Paths and Filenames",opt);
					if(j==-1)
rswindell's avatar
rswindell committed
	"~ Non-secure Inbound Directory ~\n\n"
	"This is the path where your FTN mailer stores, and where SBBSecho will\n"
	"look for, incoming files (potentially including message bundles and\n"
	"packets) from unauthenticated (non-secure) mailer sessions.\n"
	"\n"
	"Default value is `" DEFAULT_INBOUND "`."
rswindell's avatar
rswindell committed
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Non-secure Inbound Directory"
rswindell's avatar
rswindell committed
								,cfg.inbound,sizeof(cfg.inbound)-1
								,K_EDIT);
rswindell's avatar
rswindell committed
	"~ Secure Inbound Directory ~\n\n"
	"This is the path where your FTN mailer stores, and where SBBSecho will\n"
	"look for, incoming message bundles and packets for `Secure` (password\n"
	"protected) sessions.\n"
	"\n"
	"Default value is `" DEFAULT_SECURE_INBOUND "`."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Secure Inbound Directory"
rswindell's avatar
rswindell committed
								,cfg.secure_inbound,sizeof(cfg.secure_inbound)-1
								,K_EDIT);
rswindell's avatar
rswindell committed
	"~ Outbound Directory ~\n\n"
	"This is the path where your FTN mailer will look for, and where SBBSecho\n"
	"will place, outgoing message bundles and packets.\n"
	"\n"
	"In Binkley-Style Outbound mode, this serves as the base directory\n"
rswindell's avatar
rswindell committed
	"name for special foreign zone and point destination nodes as well."
rswindell's avatar
rswindell committed
	"\n"
	"Default value is `" DEFAULT_OUTBOUND "`."
rswindell's avatar
rswindell committed
	;
rswindell's avatar
rswindell committed
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Outbound Directory"
rswindell's avatar
rswindell committed
								,cfg.outbound,sizeof(cfg.outbound)-1
								,K_EDIT);
rswindell's avatar
rswindell committed
	"~ Area File ~\n\n"
	"This is the path of the file SBBSecho will use as your primary\n"
	"list of FidoNet-style message areas (default is `data/areas.bbs`).\n"
	"\n"
	"Each line in the file defines an FTN message area (echo) of the format:\n"
	"\n"
	"   <`code`> <`tag`> [[`link`] [`link`] [...]]\n"
	"\n"
	"Each field is separated by one or more white-space characters:\n"
	"\n"
	"   `<code>` is the Synchronet `internal code` for the local sub-board\n"
	"   `<tag>`  is the network's agreed-upon `echo tag` for the message area\n"
	"   `[link]` is an `FTN address` to send and receive messages for this area\n"
	"          (there may be many linked nodes for each area)\n"
	"          (often your FTN uplink/hub may be the only linked node)\n"
	"\n"
	"Example Area Line:\n"
	"\n"
	"   `FIDO_BBS_CARN    BBS_CARNIVAL                        1:218/700`\n"
	"\n"
	"Notes:\n"
	"\n"
	" `*` Only the `<code>` and `<tag>` fields are required\n"
	" `*` The `<code>` and `<tag>` fields are case in-sensitive\n"
	" `*` The `[link]` fields must be 2D, 3D, or 4D FidoNet-style node addresses\n"
	" `*` The '`<`' and '`>`', '`[`' and '`]`' characters are not part of the syntax\n"
	" `*` Lines beginning with a semicolon (`;`) are ignored (i.e. comments)\n"
	" `*` Leading white-space characters are ignored\n"
	" `*` Blank lines are ignored\n"
	" `*` A `<tag>` value of `*` indicates a `bad echo` (unknown) area\n"
	" `*` A `<code>` value of `P` indicates a pass-through message area\n"
	" `*` This file may be import/exported to/from your `Message Areas` in `SCFG`\n"
	" `*` This file may be remotely modified by authorized nodes using `AreaFix`\n"
	"\n"
	"Default value is `" DEFAULT_AREA_FILE "`."
rswindell's avatar
rswindell committed
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Area File"
rswindell's avatar
rswindell committed
								,cfg.areafile,sizeof(cfg.areafile)-1
								,K_EDIT);
rswindell's avatar
rswindell committed
	"~ Bad Area File ~\n\n"
	"This is the path of the file SBBSecho will use to record the names\n"
	"(echo tags) and descriptions of FTN message areas (echoes) that your\n"
	"system has received EchoMail for, but does not carry locally. The\n"
	"default path/filename is `" DEFAULT_BAD_AREA_FILE "`.\n"
	"\n"
	"Notes:\n"
	"\n"
	" `*` The descriptions of the areas will only be included if the\n"
	"   corresponding echo tags can be located in one of your configured\n"
	"   `EchoLists`.\n"
	"\n"
	" `*` The format of the file is the same as `BACKBONE.NA` and suitable for\n"
	"   importing into a Synchronet Message Group using `SCFG`.\n"
	"\n"
	" `*` SBBSecho will automatically sort and maintain this list, removing\n"
	"   areas if they are added to your configuration (`SCFG->Message Areas`)\n"
	"   and your `Area File`.\n"
rswindell's avatar
rswindell committed
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Bad Area File"
								,cfg.badareafile,sizeof(cfg.badareafile)-1
								,K_EDIT);
							break;

						case 5:
	uifc.helpbuf=
rswindell's avatar
rswindell committed
	"~ Log File ~\n\n"
	"This is the path of the file SBBSecho will use to log information each\n"
	"time it is run (default is `" DEFAULT_LOG_FILE "`)."
rswindell's avatar
rswindell committed
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Log File"
rswindell's avatar
rswindell committed
								,cfg.logfile,sizeof(cfg.logfile)-1
								,K_EDIT);
rswindell's avatar
rswindell committed
							break;
rswindell's avatar
rswindell committed
	"~ EchoStats File ~\n\n"
	"This is the path of the file SBBSecho will use to track statistics for\n"
	"EchoMail message areas (default is `" DEFAULT_ECHOSTATS_FILE "`)."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"EchoStats File"
								,cfg.echostats,sizeof(cfg.echostats)-1
								,K_EDIT);
rswindell's avatar
rswindell committed
							break;
rswindell's avatar
rswindell committed

						case 7:
	uifc.helpbuf=
	"~ Temporary File Directory ~\n\n"
	"This is the directory where SBBSecho will store temporary files that\n"
	"it creates and uses during its run-time (default is `" DEFAULT_TEMP_DIR "`)."
rswindell's avatar
rswindell committed
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Temp Dir"
								,cfg.temp_dir,sizeof(cfg.temp_dir)-1
								,K_EDIT);
rswindell's avatar
rswindell committed
							break;
rswindell's avatar
rswindell committed

						case 8:
	uifc.helpbuf=
	"~ Outgoing Semaphore File ~\n\n"
	"This is an optional file to create/touch whenever there are new outbound\n"
	"files created or updated by SBBSecho."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Outgoing Sem File"
								,cfg.outgoing_sem,sizeof(cfg.outgoing_sem)-1
								,K_EDIT);
rswindell's avatar
rswindell committed

rswindell's avatar
rswindell committed
			case 3:	/* NetMail Settings */
rswindell's avatar
rswindell committed
					uifc.helpbuf=
rswindell's avatar
rswindell committed
	"~ NetMail Settings ~\n"
	"\n"
	"`Sysop Aliases` is a comma-separated list of names by which the sysop\n"
	"    (user #1) may receive NetMail messages, in addition to the alias\n"
	"    and real name associated with their BBS user account.\n"
	"    This setting defaults to just '`SYSOP`'.\n"
	"\n"
    "`Default Recipient` is the name of the user account you wish to receive\n"
	"    inbound NetMail messages that have been addressed to an unrecognized\n"
	"    user name or alias.\n"
	"\n"
	"`Fuzzy Zone Operation` when set to `Yes`, if SBBSecho receives an inbound\n"
	"    netmail with `NO` international zone information, it will compare the\n"
rswindell's avatar
rswindell committed
	"    net/node of the destination to the net/node information in your AKAs\n"
	"    and assume the (source and destination) zone of a matching AKA.\n"
rswindell's avatar
rswindell committed
	"    This setting defaults to `No`.\n"
	"\n"
	"`Kill/Ignore Empty NetMail Messages` will instruct SBBSecho to simply\n"
	"    discard (not import or export) NetMail messages without any body.\n"
	"    This setting defaults to `Yes`.\n"
	"\n"
	"`Delete Processed NetMail Messages` will instruct SBBSecho to delete\n"
	"    NetMail messages/files after they have been sent or imported.\n"
	"    When set to `No`, SBBSecho will mark them as Sent or Received instead.\n"
	"    This setting defaults to `Yes`.\n"
	"\n"
	"`Ignore NetMail Destination Address` will instruct SBBSecho to treat\n"
	"    all NetMail as though it is destined for one of your systems's FTN\n"
	"    addresses (AKAs) and potentially import it.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Ignore Netmail 'Sent' Attribute` will instruct SBBSecho to export\n"
	"    NetMail messages even when their 'Sent' attribute flag is set.\n"
	"    This setting `should not` be set to `Yes` when `Delete NetMail` is\n"
	"    disabled.\n"
	"    This setting defaults to `No`.\n"
	"\n"
rswindell's avatar
rswindell committed
	"`Ignore Netmail 'KillSent' Attribute` will instruct SBBSecho to ignore\n"
	"    this attribute flag and will `not` delete Sent NetMail.\n"
	"    This setting defaults to `No`.\n"
	"\n"
rswindell's avatar
rswindell committed
	"`Ignore Netmail 'Received' Attribute` will instruct SBBSecho to import\n"
	"    NetMail messages even when their 'Received' attribute flag is set.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Ignore NetMail 'Local' Attribute` will instruct SBBSecho to import\n"
	"    NetMail messages even when their 'Local' attribute flag is set.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Maximum Age of Imported NetMail` allows you to optionally set an age\n"
	"    limit of NetMail messages that may be imported.\n"
	"    This setting defaults to `None` (no maximum age).\n"
rswindell's avatar
rswindell committed
;
rswindell's avatar
rswindell committed
					strListCombine(cfg.sysop_alias_list, sysop_aliases, sizeof(sysop_aliases)-1, ",");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%s", "Sysop Aliases",sysop_aliases);
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%s", "Default Recipient"
						,cfg.default_recipient);
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Fuzzy Zone Operation"
						,cfg.fuzzy_zone ? "Yes":"No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Kill/Ignore Empty NetMail "
						"Messages",cfg.kill_empty_netmail ? "Yes":"No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Delete Processed NetMail"
						,cfg.delete_netmail ? "Yes":"No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail Destination Address"
						,cfg.ignore_netmail_dest_addr ? "Yes" : "No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail 'Sent' Attribute"
						,cfg.ignore_netmail_sent_attr ? "Yes" : "No");
rswindell's avatar
rswindell committed
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail 'KillSent' Attribute"
						,cfg.ignore_netmail_kill_attr ? "Yes" : "No");
rswindell's avatar
rswindell committed
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail 'Received' Attribute"
						,cfg.ignore_netmail_recv_attr ? "Yes" : "No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail 'Local' Attribute"
						,cfg.ignore_netmail_local_attr ? "Yes" : "No");
					if(cfg.max_netmail_age)
rswindell's avatar
rswindell committed
						duration_to_vstr(cfg.max_netmail_age, str, sizeof(str));
rswindell's avatar
rswindell committed
					else
						SAFECOPY(str, "None");
rswindell's avatar
rswindell committed
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%s","Maximum Age of Imported NetMail"	, str);
rswindell's avatar
rswindell committed
					opt[i][0]=0;
rswindell's avatar
rswindell committed
					j=uifc.list(WIN_ACT|WIN_SAV,0,0,0,&netmail_opt,0,"NetMail Settings",opt);
					if(j==-1)
						break;
					switch(j) {
						case 0:
rswindell's avatar
rswindell committed
							uifc.helpbuf=
rswindell's avatar
rswindell committed
							"~ Sysop Aliases ~\n\n"
							"This is a comma-separated list of additional `To` names that the sysop\n"
							"(user #1) can receive netmail by. When specifying multiple aliases,\n"
							"they must be separated by a single comma and no extra white-space\n"
							"(e.g. \"SYSOP,COORDINATOR\"). The default value is just `SYSOP`.\n";
rswindell's avatar
rswindell committed
							if(uifc.input(WIN_MID|WIN_BOT|WIN_SAV,0,0,"Sysop Aliases (comma separated)"
								,sysop_aliases
								,sizeof(sysop_aliases)-1,K_EDIT|K_UPPER) >= 0) {
								strListFree(&cfg.sysop_alias_list);
								cfg.sysop_alias_list = strListSplit(NULL, sysop_aliases, ",");
							}
rswindell's avatar
rswindell committed
							uifc.input(WIN_MID|WIN_SAV,0,0,"Default Recipient"
								,cfg.default_recipient, sizeof(cfg.default_recipient)-1
								,K_EDIT|K_UPPER);
rswindell's avatar
rswindell committed
							k = !cfg.fuzzy_zone;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Fuzzy Zone Operation",uifcYesNoOpts)) {
								case 0:	cfg.fuzzy_zone = true;	break;
								case 1:	cfg.fuzzy_zone = false;	break;
							}
rswindell's avatar
rswindell committed
							k = !cfg.kill_empty_netmail;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Delete Empty NetMail",uifcYesNoOpts)) {
								case 0:	cfg.kill_empty_netmail = true;	break;
								case 1:	cfg.kill_empty_netmail = false;	break;
							}
rswindell's avatar
rswindell committed
							k = !cfg.delete_netmail;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Delete Processed NetMail",uifcYesNoOpts)) {
								case 0:	cfg.delete_netmail = true;	break;
								case 1:	cfg.delete_netmail = false;	break;
							}
rswindell's avatar
rswindell committed
							k = !cfg.ignore_netmail_dest_addr;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Ignore NetMail Destination Address",uifcYesNoOpts)) {
								case 0:	cfg.ignore_netmail_dest_addr = true;	break;
								case 1:	cfg.ignore_netmail_dest_addr = false;	break;
							}
							k = !cfg.ignore_netmail_sent_attr;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Ignore NetMail 'Sent' Attribute",uifcYesNoOpts)) {
								case 0:	cfg.ignore_netmail_sent_attr = true;	break;
								case 1:	cfg.ignore_netmail_sent_attr = false;	break;
							}
							break;
						case 7:
rswindell's avatar
rswindell committed
							k = !cfg.ignore_netmail_kill_attr;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Ignore NetMail 'KillSent' Attribute",uifcYesNoOpts)) {
								case 0:	cfg.ignore_netmail_kill_attr = true;	break;
								case 1:	cfg.ignore_netmail_kill_attr = false;	break;
							}
							break;
						case 8:
rswindell's avatar
rswindell committed
							k = !cfg.ignore_netmail_recv_attr;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Ignore NetMail 'Received' Attribute",uifcYesNoOpts)) {
								case 0:	cfg.ignore_netmail_recv_attr = true;	break;
								case 1:	cfg.ignore_netmail_recv_attr = false;	break;
							}
rswindell's avatar
rswindell committed
						case 9:
rswindell's avatar
rswindell committed
							k = !cfg.ignore_netmail_local_attr;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Ignore NetMail 'Local' Attribute",uifcYesNoOpts)) {
								case 0:	cfg.ignore_netmail_local_attr = true;	break;
								case 1:	cfg.ignore_netmail_local_attr = false;	break;
							}
rswindell's avatar
rswindell committed
						case 10:
rswindell's avatar
rswindell committed
							uifc.helpbuf=
rswindell's avatar
rswindell committed
							"~ Maximum Age of Imported NetMail ~\n\n"
							"Maximum age of NetMail that may be imported. The age is based\n"
							"on the date supplied in the message header and may be incorrect in some\n"
							"conditions (e.g. erroneous software or incorrect system date).\n"
rswindell's avatar
rswindell committed
							"Set this value to `0` to disable this feature (no maximum age imposed)."
							;
							if(cfg.max_netmail_age)
rswindell's avatar
rswindell committed
								duration_to_vstr(cfg.max_netmail_age, str, sizeof(str));
rswindell's avatar
rswindell committed
							else
								SAFECOPY(str, "None");
rswindell's avatar
rswindell committed
							if(uifc.input(WIN_MID|WIN_BOT|WIN_SAV,0,0,"Maximum NetMail Age"
								,str, 10, K_EDIT) >= 0)
								cfg.max_netmail_age = (ulong)parse_duration(str);
rswindell's avatar
rswindell committed

rswindell's avatar
rswindell committed
			case 4:	/* EchoMail Settings */
rswindell's avatar
rswindell committed
				j=0;
				while(1) {
					uifc.helpbuf=
rswindell's avatar
rswindell committed
	"~ EchoMail Settings ~\n"
	"\n"
	"`Area Manager` is the BBS user name or alias to notify (via email) of\n"
	"    AreaFix activities and errors.  This setting defaults to `SYSOP`.\n"
	"\n"
	"`Maximum Packet Size` is the largest packet file size that SBBSecho will\n"
	"    normally create (in bytes).\n"
	"    This settings defaults to `250K` (250 Kilobytes, or 256,000 bytes).\n"
	"\n"
	"`Maximum Bundle Size` is the largest bundle file size that SBBSecho will\n"
	"    normally create (in bytes).\n"
	"    This settings defaults to `250K` (250 Kilobytes, or 256,000 bytes).\n"
	"\n"
	"`Secure Operation` tells SBBSecho to check the Area File (e.g. areas.bbs)\n"
	"    to insure that the packet origin (FTN address) of EchoMail messages\n"
	"    is already linked to the EchoMail area where the message was posted.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Notify Users of Received EchoMail` tells SBBSecho to send telegrams\n"
	"    (short messages) to BBS users when EchoMail addressed to their name\n"
	"    or alias has been imported into a message base that the user has\n"
	"    access to read.\n"
	"\n"
	"`Convert Existing Tear Lines` tells SBBSecho to convert any tear lines\n"
	"    (`---`) existing in outgoing EchoMail message text to `===`.\n"
rswindell's avatar
rswindell committed
	"    This setting defaults to `No`.\n"
	"\n"
	"`Automatically Add New Subs to Area List`, when enabled, instructs\n"
rswindell's avatar
rswindell committed
	"    SBBSecho to detect newly added Sub-boards in any Message Groups that\n"
	"    are listed with a `Linked Node` as their hub/uplink and add those new\n"
	"    Sub-boards as new areas to your Area List and optionally, Area File.\n"
rswindell's avatar
rswindell committed
	"\n"
	"`Allow Nodes to Add Areas from Area File` when set to `Yes` allows linked\n"
	"    nodes to add areas listed in your Area File (e.g. `areas.bbs`).\n"
	"    When set to `No`, only areas found in one or more `EchoLists` may be\n"
	"    added via AreaFix, provided the linked node has access.\n"
	"    This setting defaults to `Yes`.\n"
	"\n"
	"`Maximum Backups to Maintain of Area File` defines the number of backup\n"
	"    versions SBBSecho will maintain of your Area File (e.g. `areas.bbs`).\n"
	"\n"
	"`Circular Path Detection` when `Enabled` will cause SBBSecho, during\n"
	"    EchoMail import, to check the PATH kludge lines for any of the\n"
	"    system's AKAs and if found (indicating a message loop), not import\n"
	"    the message.\n"
	"\n"
	"`Relay Filtered Messages` controls whether or not incoming messages that\n"
	"    have been filtered (e.g. due to maximum message age restrictions)\n"
	"    are to be forwarded to downlinks.\n"
	"\n"
	"`Outbound Bundle Attachments` may be either `Deleted` (killed) or `Truncated`\n"
	"    (changed to 0-bytes in length) after being sent by your mailer.\n"
	"    This only controls the bundle prefix that is written to the FLO\n"
	"    files (`#` for truncate, `^` for delete).\n"
	"\n"
	"`Zone Blind SEEN-BY and PATH Lines` when `Enabled` will cause SBBSecho\n"
	"    to assume that node numbers are not duplicated across zones and\n"
	"    that a net/node combination in either of these Kludge lines should\n"
	"    be used to identify a specific node regardless of which zone that\n"
	"    node is located (thus breaking the rules of FidoNet 3D addressing).\n"
	"\n"
	"`Maximum Age of Imported EchoMail` allows you to optionally set an age\n"
	"    limit of EchoMail messages that may be imported.\n"
	"    This setting defaults to `60 days`.\n"
	"\n"
	"`Require Area-Linked Nodes to be Configured` allows you to specify\n"
	"    whether or not each linked node in the area file must be configured\n"
	"    in the `Linked Nodes` list.\n"
rswindell's avatar
rswindell committed
	;

rswindell's avatar
rswindell committed
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s", "Area Manager",cfg.areamgr);
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%luK","Maximum Packet Size"
						,cfg.maxpktsize/1024UL);
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%luK","Maximum Bundle Size"
						,cfg.maxbdlsize/1024UL);
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%-3.3s","Secure Operation"
						,cfg.secure_echomail ? "Yes":"No");
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%-3.3s","Notify Users of Received EchoMail"
						,cfg.echomail_notify ? "Yes":"No");
rswindell's avatar
rswindell committed
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%-3.3s","Convert Existing Tear Lines"
						,cfg.convert_tear ? "Yes":"No");
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Automatically Add New Subs "
						"to Area List", cfg.auto_add_subs ? (cfg.auto_add_to_areafile ? "List/File":"List Only"):"No");
rswindell's avatar
rswindell committed
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%-3.3s","Allow Nodes to Add Areas "
						"from Area File",cfg.add_from_echolists_only ? "No":"Yes");
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%u","Maximum Backups to Maintain of Area File"
						,cfg.areafile_backups);
rswindell's avatar
rswindell committed
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Circular Path Detection"
						,cfg.check_path ? "Enabled" : "Disabled");
rswindell's avatar
rswindell committed
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Relay Filtered Messages"
						,cfg.relay_filtered_msgs ? "Yes" : "No");
rswindell's avatar
rswindell committed
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Outbound Bundle Attachments"
						,cfg.trunc_bundles ? "Truncate" : "Delete");
					if(cfg.zone_blind)
						sprintf(str,"Zones 1-%u", cfg.zone_blind_threshold);
					else
						SAFECOPY(str,"Disabled");
rswindell's avatar
rswindell committed
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Zone Blind SEEN-BY and PATH Lines", str);
					if(cfg.max_echomail_age)
rswindell's avatar
rswindell committed
						duration_to_vstr(cfg.max_echomail_age, str, sizeof(str));
rswindell's avatar
rswindell committed
					else
						SAFECOPY(str, "None");
rswindell's avatar
rswindell committed
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Maximum Age of Imported EchoMail", str);
					snprintf(opt[i++],MAX_OPLN-1,"%-45.45s%s","Require Area-Linked Nodes to be Configured"
						,cfg.require_linked_node_cfg ? "Yes" : "No");
rswindell's avatar
rswindell committed
					opt[i][0]=0;
					j=uifc.list(WIN_ACT|WIN_SAV,0,0,0,&echomail_opt,0,"EchoMail Settings",opt);
rswindell's avatar
rswindell committed
				uifc.helpbuf=
rswindell's avatar
rswindell committed
				"~ Area Manager ~\n\n"
rswindell's avatar
rswindell committed
				"Local user to notify of AreaFix activity and errors.\n";
rswindell's avatar
rswindell committed
							uifc.input(WIN_MID|WIN_BOT|WIN_SAV,0,0,"Area Manager (user name or alias)"
								,cfg.areamgr
								,LEN_ALIAS,K_EDIT);
rswindell's avatar
rswindell committed

rswindell's avatar
rswindell committed
				uifc.helpbuf=
rswindell's avatar
rswindell committed
				"~ Maximum Packet Size ~\n\n"
				"This is the maximum file size that SBBSecho will create when placing\n"
				"outgoing messages into packets.  The default max size is 250 Kilobytes.\n";
rswindell's avatar
rswindell committed
							sprintf(str,"%lu",cfg.maxpktsize);
							uifc.input(WIN_MID|WIN_BOT|WIN_SAV,0,0,"Maximum Packet Size (in Bytes)",str
								,9,K_EDIT|K_NUMBER);
							cfg.maxpktsize=atol(str);
rswindell's avatar
rswindell committed

rswindell's avatar
rswindell committed
				uifc.helpbuf=
rswindell's avatar
rswindell committed
				"~ Maximum Bundle Size ~\n\n"
				"This is the maximum file size that SBBSecho will create when placing\n"