echocfg.c

		sprintf(opt[i++],"Paths and Filenames");
		sprintf(opt[i++],"Robots");
		sprintf(opt[i++],"Domains");
		sprintf(opt[i++],"EchoLists");
		if(uifc.changes && !cfg.used_include)
			snprintf(opt[i++],MAX_OPLN-1,"Save Changes to %s", getfname(cfg.cfgfile));
		opt[i][0]=0;
		switch(uifc.list(WIN_ORG|WIN_MID|WIN_ACT|WIN_ESC,0,0,0,&dflt,0
			,"Configure FidoNet",opt)) {

			case 0:
				global_settings();
				break;

			case 1:
				i=0;
				while(1) {
					uifc.helpbuf=
	"~ Linked Nodes ~\n\n"
	"From this menu you can configure the settings for your linked\n"
	"FidoNet-style nodes (uplinks and downlinks).\n"
	"\n"
	"A single node configuration can represent one node or a collection\n"
	"of nodes, by using the `ALL` wildcard word.\n"
	"\n"
	"The hexadecimal numbers in parentheses are provided as an aide when\n"
	"correlating FidoNet files and BSO directories with node numbers.\n"
	"\n"
	"An exclamation mark denotes passive (inactive) nodes.\n";
	;

					for(u=0;u<cfg.nodecfgs;u++) {
						char hexaddr[16] = "";
						if(cfg.nodecfg[u].addr.zone != 0xffff) {
							if(!faddr_contains_wildcard(&cfg.nodecfg[u].addr))
								sprintf(hexaddr, "(%04hx%04hx)", cfg.nodecfg[u].addr.net,cfg.nodecfg[u].addr.node);
							else
								sprintf(hexaddr, "(.%03X)", cfg.nodecfg[u].addr.zone);
						}
						snprintf(opt[u], MAX_OPLN-1, "%-16s %-10s %c%s"
							,faddrtoa(&cfg.nodecfg[u].addr), hexaddr
							,cfg.nodecfg[u].passive ? '!' : ' '
							,cfg.nodecfg[u].name[0] ? cfg.nodecfg[u].name : cfg.nodecfg[u].comment);
					}
					opt[u][0]=0;
					int mode = WIN_SAV | WIN_INS | WIN_DEL | WIN_ACT
						| WIN_INSACT | WIN_DELACT | WIN_XTR;
					if(cfg.nodecfgs)
						mode |= WIN_COPY | WIN_CUT;
					if (savnodecfg.addr.zone)
						mode |= WIN_PASTE | WIN_PASTEXTR;
					i=uifc.list(mode,0,0,0,&node_opt,&node_bar,"Linked Nodes",opt);
					if(i==-1)
						break;
					int msk = i&MSK_ON;
					i &= MSK_OFF;
					if (msk == MSK_INS) {
						str[0]=0;
	uifc.helpbuf=
	"~ Address ~\n\n"
	"This is the FidoNet style address of the node you wish to add (3D or 4D).\n"
	"The `ALL` wildcard may be usd for portions of the address.\n"
	;
						if(uifc.input(WIN_MID|WIN_SAV,0,0
							,"Node Address (ALL wildcard allowed)",str
							,25,K_EDIT)<1)
							continue;
						if(!new_node(i)) {
							printf("\nMemory Allocation Error\n");
							exit(1);
						}
						cfg.nodecfg[i].addr=atofaddr(str);
						uifc.changes=TRUE;
						continue;
					}

					if (msk == MSK_DEL || msk == MSK_CUT) {
						if(msk == MSK_CUT)
							memcpy(&savnodecfg, &cfg.nodecfg[i], sizeof(nodecfg_t));
						cfg.nodecfgs--;
						if(cfg.nodecfgs<=0) {
							cfg.nodecfgs=0;
							continue;
						}
						for(u=i;u<cfg.nodecfgs;u++)
							memcpy(&cfg.nodecfg[u],&cfg.nodecfg[u+1]
								,sizeof(nodecfg_t));
						uifc.changes=TRUE;
						continue;
					}
					if (msk == MSK_COPY) {
						memcpy(&savnodecfg,&cfg.nodecfg[i],sizeof(nodecfg_t));
						continue;
					}
					if (msk == MSK_PASTE) {
						if(!new_node(i))
							continue;
						memcpy(&cfg.nodecfg[i],&savnodecfg,sizeof(nodecfg_t));
						uifc.changes=TRUE;
						continue;
					}
					while(1) {
	uifc.helpbuf=
	"~ Linked Node Settings ~\n"
	"\n"
	"`Address` is the FidoNet-style address in the Zone:Net/Node (3D) or\n"
	"    Zone:Net/Node.Point (4D) format. The wildcard word '`ALL`' may be used\n"
	"    in place of one of the fields to create a node configuration which\n"
	"    will apply to *all* nodes matching that address pattern.\n"
	"    e.g. '`1:ALL`' matches all nodes within FidoNet Zone 1.\n"
	"\n"
	"`Name` is name of the system operator of the configured node. This is used\n"
	"    as the destination name for AreaMgr Notification NetMail messages.\n"
	"\n"
	"`Comment` is a note to yourself about this node. Setting this to the\n"
	"    BBS name or official FidoNet title corresponding with the configured\n"
	"    node can be a helpful reminder to yourself later.\n"
	"\n"
	"`Archive Type` is the name of an archive type corresponding with one of\n"
	"    your configured archive types or '`None`'.  This archive type will\n"
	"    be used when creating EchoMail bundles or if `None`, raw/uncompressed\n"
	"    EchoMail packets will be sent to this node.\n"
	"    This setting may be managed by the node using AreaMgr requests.\n"
	"\n"
	"`Packet Type` is the type of outbound packet generated for this node.\n"
	"    Incoming packet types are automatically detected from among the list\n"
	"    of supported packet types (`2`, `2.2`, `2e`, and `2+`).\n"
	"    The default outbound packet type is `2+`.\n"
	"\n"
	"`Packet Password` is an optional password that may be added to outbound\n"
	"    packets for this node.  Incoming packet passwords are compared with\n"
	"    this password value.  If this password is blank/empty and `Strict\n"
	"    Packet Passwords` are enabled, then incoming packets from this node\n"
	"    must also have no password.  Packet passwords are case insensitive.\n"
	"    This setting may be managed by the node using AreaMgr requests.\n"
	"\n"
	"`Session Password` is the password that will be used for authenticated\n"
	"    BinkP sessions with this node. Session passwords are case sensitive.\n"
	"    This password is only used by BinkIT (if you choose to use it).\n"
	"\n"
	"`TIC File Password` is an optional password that may be configured here\n"
	"    (and in your `sbbsecho.ini` file) for use by `tickit.js` when creating\n"
	"    or authenticating `.TIC` files.\n"
	"    This setting may be managed by the node using AreaMgr requests.\n"
	"\n"
	"`AreaMgr Support` is a toggle that determines whether or not this node\n"
	"    may send AreaMgr NetMail requests to your system to perform remote\n"
	"    area and account management (e.g. addressed to '`AreaFix`').\n"
	"\n"
	"`AreaMgr Password` is an optional password used to authenticate inbound\n"
	"    AreaMgr NetMail requests (Remote Area Management) from this node.\n"
	"    AreaMgr Passwords are case insensitive.\n"
	"    This setting may be managed by the node using AreaMgr requests.\n"
	"\n"
	"`EchoList Keys` is a list of keys which enable AreaMgr access to one or\n"
	"    more additional EchoLists.\n"
	"\n"
	"`Status` is the default mode for sending mail to this node: `Normal`, `Hold`\n"
	"    (wait for pickup) or `Crash` (immediate).\n"
	"\n"
	"`Direct` determines whether to connect to this node directly (whenever\n"
	"    possible) when sending mail to this node.\n"
	"\n"
	"`Passive` is used to temporarily disable (pause) the packing and sending\n"
	"    of EchoMail for this node.  The opposite of Passive is `Active`.\n"
	"    This setting may be managed by the node using AreaMgr requests.\n"
	"\n"
	"`Send Notify List` is used to flag nodes that you want notified via\n"
	"    NetMail of their current AreaMgr settings whenever SBBSecho is run\n"
	"    with the '`G`' option.\n"
	"\n"
	"`Uplink for Message Groups` is an optional list of Message Groups (short\n"
	"    names) for which this node is a hub/uplink for your system.  This\n"
	"    setting is used in combination with the `Auto Add Sub-boards` feature\n"
	"    to auto-link hubs with the newly added areas in your Area File.\n"
	"\n"
	"`Local Address` is an optional local system address (AKA) to use when\n"
	"    sending packets to this node.  When a Local Address is not specified\n"
	"    SBBSecho will automatically choose the local address that matches\n"
	"    the destination address (zone and net number) the closest\n"
	"    (Best Match).\n"
	"\n"
	"`Route To` is only used in Binkley-Style Outbound (BSO/FLO) operating\n"
	"    mode and is used to set the FTN address to route mail for this node.\n"
	"\n"
	"`Inbox Directory` is only used in BSO operating mode and is an optional\n"
	"    alternate directory to search for incoming files from this node\n"
	"    (e.g. used in combination with BinkD's ibox setting).\n"
	"\n"
	"`Outbox Directory` is only used in BSO operating mode and is an optional\n"
	"    alternate directory to place outbound files for this node (e.g. used\n"
	"    in combination with BinkD's obox setting).\n"
	"\n"
	"`BinkP Settings` are settings specific to BinkP/BinkIT mailer operation.\n"
	;
						j=0;
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Address"
							,faddrtoa(&cfg.nodecfg[i].addr));
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Domain"
							,cfg.nodecfg[i].domain);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Name"
							,cfg.nodecfg[i].name);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Comment"
							,cfg.nodecfg[i].comment);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Archive Type"
							,cfg.nodecfg[i].archive ==  SBBSECHO_ARCHIVE_NONE ?
							"None":cfg.nodecfg[i].archive->name);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Packet Type"
							,pktTypeStringList[cfg.nodecfg[i].pkt_type]);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Packet Password"
							,cfg.nodecfg[i].pktpwd);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Session Password"
							,cfg.nodecfg[i].sesspwd);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","TIC File Password"
							,cfg.nodecfg[i].ticpwd);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","AreaMgr Support"
							,cfg.nodecfg[i].areamgr ? "Yes" : "No");
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","AreaMgr Password"
							,cfg.nodecfg[i].password);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","EchoList Keys"
							,strListCombine(cfg.nodecfg[i].keys,str,sizeof(str),","));
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Status"
							,mailStatusStringList[cfg.nodecfg[i].status]);
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Direct"
							,cfg.nodecfg[i].direct ? "Yes":"No");
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Passive"
							,cfg.nodecfg[i].passive ? "Yes":"No");
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Send Notify List"
							,cfg.nodecfg[i].send_notify ? "Yes" : "No");
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Uplink for Message Groups"
							,strListCombine(cfg.nodecfg[i].grphub,str,sizeof(str),","));
						snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Local Address (AKA)"
							,cfg.nodecfg[i].local_addr.zone
							? faddrtoa(&cfg.nodecfg[i].local_addr) : "Best Match");
						if(cfg.flo_mailer) {
							snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s","Route To"
								,cfg.nodecfg[i].route.zone
								? faddrtoa(&cfg.nodecfg[i].route) : "Disabled");
							if(!faddr_contains_wildcard(&cfg.nodecfg[i].addr)) {
								snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s", "Inbox Directory", cfg.nodecfg[i].inbox);
								snprintf(opt[j++],MAX_OPLN-1,"%-30.30s %s", "Outbox Directory", cfg.nodecfg[i].outbox);
								strcpy(opt[j++], "BinkP Settings...");
							}
						}
						opt[j][0]=0;
						SAFEPRINTF(str, "Linked Node - %s"
							,cfg.nodecfg[i].name[0] ? cfg.nodecfg[i].name : faddrtoa(&cfg.nodecfg[i].addr));
						uifc_winmode_t wmode = WIN_MID|WIN_ACT|WIN_SAV|WIN_EXTKEYS;
						if(i > 0)
							wmode |= WIN_LEFTKEY;
						if(i + 1 < (int)cfg.nodecfgs)
							wmode |= WIN_RIGHTKEY;
						k=uifc.list(wmode,0,0,72,&nodeop,&nodeopbar,str,opt);
						if(k==-1)
							break;
						switch(k) {
							case -CIO_KEY_LEFT-2:
								if(i > 0)
									i--;
								break;
							case -CIO_KEY_RIGHT-2:
								if(i + 1 < (int)cfg.nodecfgs)
									i++;
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Address ~\n\n"
	"This is the FidoNet style address of this linked node.\n";
								SAFECOPY(str,faddrtoa(&cfg.nodecfg[i].addr));
								if(uifc.input(WIN_MID|WIN_SAV,0,0
									,"Node Address (ALL wildcard allowed)",str
									,25,K_EDIT|K_UPPER)>0)
									cfg.nodecfg[i].addr=atofaddr(str);
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Domain ~\n\n"
	"This is the domain portion of the 5D FTN address of this linked node\n"
	"(e.g. '`fidonet`').  FTN domains are limited to 8 characters and must not\n"
	"contain the characters '@' or '.'.\n"
	"\n"
	"This setting is currently not used by SBBSecho but is available and\n"
	"managed here for 5D address use by BinkIT.";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"Domain"
									,cfg.nodecfg[i].domain, sizeof(cfg.nodecfg[i].domain)-1
									,K_EDIT);
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Name ~\n\n"
	"This is an optional NetMail destination name for the node (e.g. the sysop's name).\n"
	"This is used for AreaManager Notification NetMail messages.\n";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"Name"
									,cfg.nodecfg[i].name,sizeof(cfg.nodecfg[i].name)-1
									,K_EDIT);
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Comment ~\n\n"
	"This is an optional comment for the node (e.g. the sysop's name).\n"
	"This is used for informational purposes only.\n";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"Comment"
									,cfg.nodecfg[i].comment,sizeof(cfg.nodecfg[i].comment)-1
									,K_EDIT);
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Archive Type ~\n\n"
	"This is the archive type that will be used for compressing packets\n"
	"into archive bundles for this node.\n";
								int cur=cfg.arcdefs;
								for(u=0;u<cfg.arcdefs;u++) {
									if(cfg.nodecfg[i].archive == &cfg.arcdef[u])
										cur=u;
									strcpy(opt[u],cfg.arcdef[u].name);
								}
								strcpy(opt[u++],"None");
								opt[u][0]=0;
								k=uifc.list(WIN_RHT|WIN_SAV,0,0,0,&cur,0
									,"Archive Type",opt);
								if(k==-1)
									break;
								if((unsigned)k>=cfg.arcdefs)
									cfg.nodecfg[i].archive = SBBSECHO_ARCHIVE_NONE;
								else
									cfg.nodecfg[i].archive = &cfg.arcdef[k];
								uifc.changes=TRUE;
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Packet Type ~\n\n"
	"This is the packet header type that will be used in mail packets\n"
	"created for this node.  SBBSecho defaults to creating `Type-2+` packets.\n"
	"\n"
	PACKET_TYPE_HELP_TEXT
	;
								j=cfg.nodecfg[i].pkt_type;
								k=uifc.list(WIN_RHT|WIN_SAV,0,0,0,&j,0,"Packet Type"
									,pktTypeStringList);
								if(k==-1)
									break;
								cfg.nodecfg[i].pkt_type=k;
								uifc.changes=TRUE;
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Packet Password ~\n\n"
	"This is an optional password that SBBSecho will place into packets\n"
	"destined for this node.\n"
	"\n"
	"Packet passwords are `case-insensitive`";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"Packet Password (optional)"
									,cfg.nodecfg[i].pktpwd,sizeof(cfg.nodecfg[i].pktpwd)-1
									,K_EDIT|K_UPPER);
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Session Password ~\n\n"
	"This is an optional password that BinkIT will use for authenticated\n"
	"BinkP sessions with this node.\n"
	"\n"
	"Session passwords are `case-sensitive`";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"Session Password"
									,cfg.nodecfg[i].sesspwd,sizeof(cfg.nodecfg[i].sesspwd)-1
									,K_EDIT);
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ TIC File Password ~\n\n"
	"This is an optional password that tickit.js will use for creating\n"
	"and authenticating `.TIC` files to/from this node.\n";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"TIC File Password (optional)"
									,cfg.nodecfg[i].ticpwd,sizeof(cfg.nodecfg[i].ticpwd)-1
									,K_EDIT|K_UPPER);
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ AreaManager Support ~\n\n"
	"If you wish for this node to be able to remotely query or change their\n"
	"configuration via `AreaManager` (AreaFix) NetMail messages, set to option to `Yes`.\n";
								k = cfg.nodecfg[i].areamgr;
								switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
									,"AreaManager Support",uifcYesNoOpts)) {
									case 0:	cfg.nodecfg[i].areamgr = true;	uifc.changes=TRUE; break;
									case 1:	cfg.nodecfg[i].areamgr = false;	uifc.changes=TRUE; break;
								}
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ AreaFix Password ~\n\n"
	"This is the password that will be used by this node when doing remote\n"
	"AreaManager / AreaFix functions.\n";
								uifc.input(WIN_MID|WIN_SAV,0,0
									,"AreaManager Password"
									,cfg.nodecfg[i].password,sizeof(cfg.nodecfg[i].password)-1
									,K_EDIT|K_UPPER|K_NOSPACE);
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ EchoList Keys ~\n\n"
	"These are a named-keys to be given to this node allowing access to one\n"
	"or more of the configured `EchoLists` for remote area-add requests.\n";
								while(1) {
									for(j=0; cfg.nodecfg[i].keys!=NULL && cfg.nodecfg[i].keys[j]!=NULL ;j++)
										strcpy(opt[j],cfg.nodecfg[i].keys[j]);
									opt[j][0]=0;
									k=uifc.list(WIN_SAV|WIN_INS|WIN_DEL|WIN_ACT|
										WIN_XTR|WIN_INSACT|WIN_DELACT|WIN_RHT
										,0,0,0,&k,0,"EchoList Keys",opt);
									if(k==-1)
										break;
									if((k&MSK_ON)==MSK_INS) {
										k&=MSK_OFF;
										if(uifc.input(WIN_MID|WIN_SAV,0,0
											,"EchoList Key",str,SBBSECHO_MAX_KEY_LEN
											,K_UPPER)<1)
											continue;
										strListInsert(&cfg.nodecfg[i].keys, str, k);
										uifc.changes=TRUE;
										continue;
									}

									if((k&MSK_ON)==MSK_DEL) {
										k&=MSK_OFF;
										strListRemove(&cfg.nodecfg[i].keys, k);
										uifc.changes=TRUE;
										continue;
									}
									SAFECOPY(str,cfg.nodecfg[i].keys[k]);
									uifc.input(WIN_MID|WIN_SAV,0,0,"EchoList Key"
										,str,SBBSECHO_MAX_KEY_LEN,K_EDIT|K_UPPER);
									strListReplace(cfg.nodecfg[i].keys, k, str);
									uifc.changes=TRUE;
									continue;
								}
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Mail Status ~\n\n"
	"Set the mail status for this node: `Normal`, `Hold`, or `Crash`.\n";
								j=cfg.nodecfg[i].status;
								k=uifc.list(WIN_RHT|WIN_SAV,0,0,0,&j,0,"Mail Status"
									,mailStatusStringList);
								if(k==-1)
									break;
								if(cfg.nodecfg[i].status!=k) {
									cfg.nodecfg[i].status=k;
									uifc.changes=TRUE;
								}
								break;
							case __COUNTER__:
								k = !cfg.nodecfg[i].direct;
								switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
									,"Direct Delivery",uifcYesNoOpts)) {
									case 0:	cfg.nodecfg[i].direct = true;	uifc.changes=TRUE; break;
									case 1:	cfg.nodecfg[i].direct = false;	uifc.changes=TRUE; break;
								}
								break;
							case __COUNTER__:
								k = !cfg.nodecfg[i].passive;
								switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
									,"Passive Node",uifcYesNoOpts)) {
									case 0:	cfg.nodecfg[i].passive = true;	uifc.changes=TRUE; break;
									case 1:	cfg.nodecfg[i].passive = false;	uifc.changes=TRUE; break;
								}
								break;
							case __COUNTER__:
								k = !cfg.nodecfg[i].send_notify;
								switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
									,"Send AreaManager Notifications",uifcYesNoOpts)) {
									case 0:	cfg.nodecfg[i].send_notify = true;	uifc.changes=TRUE; break;
									case 1:	cfg.nodecfg[i].send_notify = false;	uifc.changes=TRUE; break;
								}
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Uplink for Message Groups ~\n\n"
	"These are Message Group short names (as configured in SCFG) for which\n"
	"this linked node is your system's uplink (hub).\n"
	"\n"
	"Use of this setting allows your hub to be automatically linked with new\n"
	"areas when new Sub-boards (within a listed group) are auto-added to the\n"
	"Area File."
	;
								while(1) {
									for(j=0; cfg.nodecfg[i].grphub!=NULL && cfg.nodecfg[i].grphub[j]!=NULL ;j++)
										strcpy(opt[j],cfg.nodecfg[i].grphub[j]);
									opt[j][0]=0;
									k=uifc.list(WIN_SAV|WIN_INS|WIN_DEL|WIN_ACT|
										WIN_XTR|WIN_INSACT|WIN_DELACT|WIN_RHT
										,0,0,0,&k,0,"Uplink for Message Groups",opt);
									if(k==-1)
										break;
									if((k&MSK_ON)==MSK_INS) {
										k&=MSK_OFF;
										if(uifc.input(WIN_MID|WIN_SAV,0,0
											,"Message Group (short name)",str,LEN_GSNAME
											,/* kmode: */0) < 1)
											continue;
										strListInsert(&cfg.nodecfg[i].grphub, str, k);
										uifc.changes=TRUE;
										continue;
									}

									if((k&MSK_ON)==MSK_DEL) {
										k&=MSK_OFF;
										strListRemove(&cfg.nodecfg[i].grphub, k);
										uifc.changes=TRUE;
										continue;
									}
									SAFECOPY(str,cfg.nodecfg[i].grphub[k]);
									uifc.input(WIN_MID|WIN_SAV,0,0,"Message Group (short name)"
										,str,LEN_GSNAME,K_EDIT|K_UPPER);
									strListReplace(cfg.nodecfg[i].grphub, k, str);
									uifc.changes=TRUE;
									continue;
								}
								break;
							case __COUNTER__:
								SAFECOPY(str,faddrtoa(&cfg.nodecfg[i].local_addr));
								if(uifc.input(WIN_MID|WIN_SAV,0,0
									,"Local Source Address (AKA) to Use",str
									,25,K_EDIT) >= 0) {
									if(str[0])
										cfg.nodecfg[i].local_addr = atofaddr(str);
									else
										cfg.nodecfg[i].local_addr.zone = 0;
									uifc.changes=TRUE;
								}
								break;
							case __COUNTER__:
	uifc.helpbuf=
	"~ Route To ~\n\n"
	"When using a BSO/FLO type mailer, this is the Fido address to route mail\n"
	"for this node(s) to.\n"
	"\n"
	"This option is normally only used with wildcard type node entries\n"
	"(e.g. `ALL`, or `1:ALL`, `2:ALL`, etc.) and is used to route non-direct\n"
	"NetMail packets to your uplink node (hub).\n";
								SAFECOPY(str,faddrtoa(&cfg.nodecfg[i].route));
								if(uifc.input(WIN_MID|WIN_SAV,0,0
									,"Node Address to Route To",str
									,25,K_EDIT) >= 0) {
									if(str[0])
										cfg.nodecfg[i].route=atofaddr(str);
									else
										cfg.nodecfg[i].route.zone=0;
									uifc.changes=TRUE;
								}
								break;
							case __COUNTER__:
								uifc.input(WIN_MID|WIN_SAV,0,0,"Inbound FileBox Directory"
									,cfg.nodecfg[i].inbox, sizeof(cfg.nodecfg[i].inbox)-1
									,K_EDIT);
								break;
							case __COUNTER__:
								uifc.input(WIN_MID|WIN_SAV,0,0,"Outbound FileBox Directory"
									,cfg.nodecfg[i].outbox, sizeof(cfg.nodecfg[i].outbox)-1
									,K_EDIT);
								break;
							case __COUNTER__:
								binkp_settings(&cfg.nodecfg[i]);
								break;
						}
					}
				}
				break;

			case 5:	/* Paths and Filenames... */
				j=0;
				while(1) {
					i=0;
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Non-secure Inbound Directory"
						,cfg.inbound[0] ? cfg.inbound : DEFAULT_INBOUND);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Secure Inbound Directory"
						,cfg.secure_inbound[0] ? cfg.secure_inbound : DEFAULT_SECURE_INBOUND);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Outbound Directory"
						,cfg.outbound[0] ? cfg.outbound : DEFAULT_OUTBOUND);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Area File"
						,cfg.areafile[0] ? cfg.areafile : DEFAULT_AREA_FILE);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Bad Area File"
						,cfg.badareafile[0] ? cfg.badareafile : DEFAULT_BAD_AREA_FILE);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Log File"
						,cfg.logfile[0] ? cfg.logfile : DEFAULT_LOG_FILE);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Echo Statistics File"
						,cfg.echostats[0] ? cfg.echostats : DEFAULT_ECHOSTATS_FILE);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Temporary File Directory"
						,cfg.temp_dir[0] ? cfg.temp_dir	: DEFAULT_TEMP_DIR);
					snprintf(opt[i++],MAX_OPLN-1,"%-30.30s %s","Outgoing Semaphore File"
						,cfg.outgoing_sem);
					opt[i][0]=0;
					uifc.helpbuf=
						"~ Paths and Filenames ~\n\n"
						"From this menu you can configure the paths and filenames that SBBSecho\n"
						"will use during its operation (e.g. importing and exporting messages).\n";
					j=uifc.list(WIN_ACT|WIN_SAV,0,0,0,&path_opt,0
						,"Paths and Filenames",opt);
					if(j==-1)
						break;
					switch(j) {
						case 0:
	uifc.helpbuf=
	"~ Non-secure Inbound Directory ~\n\n"
	"This is the path where your FTN mailer stores, and where SBBSecho will\n"
	"look for, incoming files (potentially including message bundles and\n"
	"packets) from unauthenticated (non-secure) mailer sessions.\n"
	"\n"
	"Default value is `" DEFAULT_INBOUND "`."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Non-secure Inbound Directory"
								,cfg.inbound,sizeof(cfg.inbound)-1
								,K_EDIT);
							break;

						case 1:
	uifc.helpbuf=
	"~ Secure Inbound Directory ~\n\n"
	"This is the path where your FTN mailer stores, and where SBBSecho will\n"
	"look for, incoming message bundles and packets for `Secure` (password\n"
	"protected) sessions.\n"
	"\n"
	"Default value is `" DEFAULT_SECURE_INBOUND "`."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Secure Inbound Directory"
								,cfg.secure_inbound,sizeof(cfg.secure_inbound)-1
								,K_EDIT);
							break;

						case 2:
	uifc.helpbuf=
	"~ Outbound Directory ~\n\n"
	"This is the path where your FTN mailer will look for, and where SBBSecho\n"
	"will place, outgoing message bundles and packets.\n"
	"\n"
	"In Binkley-Style Outbound mode, this serves as the base directory\n"
	"name for special foreign zone and point destination nodes as well."
	"\n"
	"Default value is `" DEFAULT_OUTBOUND "`."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Outbound Directory"
								,cfg.outbound,sizeof(cfg.outbound)-1
								,K_EDIT);
							break;

						case 3:
	uifc.helpbuf=
		"~ Area File ~\n\n"
		"This is the path of the file SBBSecho will use as your primary\n"
		"list of FidoNet-style message areas.  This file is only required\n"
		"to exist if you need SBBSecho to support Area Manager operations.\n"
		"\n"
		"Two area file formats are supported by SBBSecho (pick one):\n"
		" * `areas.bbs` - historic/legacy style, one echo/area per line\n"
		" * `areas.ini` - more modern style, one echo/area per [section]\n"
		"\n"
		"~ areas.bbs format ~\n"
		"\n"
		"Each line in the file defines an FTN message area (echo) of the format:\n"
		"\n"
		"   `code` `tag` `link` [`link` ...]\n"
		"\n"
		"Each field is separated by one or more white-space characters:\n"
		"\n"
		"   `code` is the Synchronet `internal code` for the local sub-board\n"
		"   `tag`  is the network's agreed-upon `echo tag` for the message area\n"
		"   `link` is an `FTN address` to send and receive messages for this area\n"
		"        There may be many linked nodes for each area\n"
		"        or your FTN uplink/hub may be the only linked node.\n"
		"\n"
		"Example areas.bbs Area Line:\n"
		"\n"
		"   `FIDO_BBS_CARN    BBS_CARNIVAL     1:218/700`\n"
		"\n"
		"Notes:\n"
		"\n"
		" `*` Only the `code` and `tag` fields are required\n"
		" `*` The `code` and `tag` fields are case in-sensitive\n"
		" `*` The `link` fields must be 2D, 3D, or 4D FidoNet-style node addresses\n"
		" `*` The '`[`' and '`]`' characters are not part of the link syntax\n"
		" `*` Lines beginning with a semicolon (`;`) are ignored (i.e. comments)\n"
		" `*` Leading white-space characters are ignored\n"
		" `*` Blank lines are ignored\n"
		" `*` A `tag` value of '`*`' indicates a `bad echo` (unknown) area\n"
		" `*` A `code` value of '`P`' indicates a `pass-through` message area\n"
		" `*` This file may be import/exported to/from your `Message Areas` in `SCFG`\n"
		" `*` This file may be remotely modified by authorized nodes using `AreaMgr`\n"
		"\n"
		"~ areas.ini format ~\n"
		"\n"
		"[`tag`]\n"
		"sub = `code`\n"
		"links = `link` [`link` ...]\n"
		"pass-through = `true` or `false` (default: `false`)\n"
		"\n"
		"Example areas.ini Area Section:\n"
		"\n"
		"   `[BBS_CARNIVAL]\n"
		"   sub = FIDO_BBS_CARN\n"
		"   links = 1:218/700`\n"
		"\n"
		"Notes:\n"
		"\n"
		" `*` Each area definition begins with the `[tag]` line\n"
		"   (the '`[`' and '`]`' characters are required)\n"
		" `*` The `code` and `tag` values are case in-sensitive\n"
		" `*` The `link` values must be 2D, 3D, or 4D FidoNet-style node addresses\n"
		" `*` The '`[`' and '`]`' characters are not part of the link syntax\n"
		" `*` Lines beginning with a semicolon (`;`) are ignored (i.e. comments)\n"
		" `*` Leading white-space characters are ignored\n"
		" `*` Blank lines are ignored\n"
		" `*` A `tag` value (section name) of '`*`' indicates a `bad echo` (unknown) area\n"
		" `*` This file may be import/exported to/from your `Message Areas` in `SCFG`\n"
		" `*` This file may be remotely modified by authorized nodes using `AreaMgr`\n"
		"\n"
		"Default value is: `" DEFAULT_AREA_FILE "`"
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Area File"
								,cfg.areafile,sizeof(cfg.areafile)-1
								,K_EDIT);
							break;

						case 4:
	uifc.helpbuf=
	"~ Bad Area File ~\n\n"
	"This is the path of the file SBBSecho will use to record the names\n"
	"(echo tags) and descriptions of FTN message areas (echoes) that your\n"
	"system has received EchoMail for, but does not carry locally. The\n"
	"default path/filename is `" DEFAULT_BAD_AREA_FILE "`.\n"
	"\n"
	"Notes:\n"
	"\n"
	" `*` The descriptions of the areas will only be included if the\n"
	"   corresponding echo tags can be located in one of your configured\n"
	"   `EchoLists`.\n"
	"\n"
	" `*` The format of the file is the same as `BACKBONE.NA` and suitable for\n"
	"   importing into a Synchronet Message Group using `SCFG`.\n"
	"\n"
	" `*` SBBSecho will automatically sort and maintain this list, removing\n"
	"   areas if they are added to your configuration (`SCFG->Message Areas`)\n"
	"   and your `Area File`.\n"
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Bad Area File"
								,cfg.badareafile,sizeof(cfg.badareafile)-1
								,K_EDIT);
							break;

						case 5:
	uifc.helpbuf=
	"~ Log File ~\n\n"
	"This is the path of the file SBBSecho will use to log information each\n"
	"time it is run (default is `" DEFAULT_LOG_FILE "`)."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Log File"
								,cfg.logfile,sizeof(cfg.logfile)-1
								,K_EDIT);
							break;

						case 6:
	uifc.helpbuf=
	"~ EchoStats File ~\n\n"
	"This is the path of the file SBBSecho will use to track statistics for\n"
	"EchoMail message areas (default is `" DEFAULT_ECHOSTATS_FILE "`)."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"EchoStats File"
								,cfg.echostats,sizeof(cfg.echostats)-1
								,K_EDIT);
							break;

						case 7:
	uifc.helpbuf=
	"~ Temporary File Directory ~\n\n"
	"This is the directory where SBBSecho will store temporary files that\n"
	"it creates and uses during its run-time (default is `" DEFAULT_TEMP_DIR "`)."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Temp Dir"
								,cfg.temp_dir,sizeof(cfg.temp_dir)-1
								,K_EDIT);
							break;

						case 8:
	uifc.helpbuf=
	"~ Outgoing Semaphore File ~\n\n"
	"This is an optional file to create/touch whenever there are new outbound\n"
	"files created or updated by SBBSecho."
	;
							uifc.input(WIN_L2R|WIN_SAV,0,0,"Outgoing Sem File"
								,cfg.outgoing_sem,sizeof(cfg.outgoing_sem)-1
								,K_EDIT);
							break;
					}
				}
				break;

			case 3:	/* NetMail Settings */
				j=0;
				while(1) {
					uifc.helpbuf=
	"~ NetMail Settings ~\n"
	"\n"
	"`Sysop Aliases` is a comma-separated list of names by which the sysop\n"
	"    (user #1) may receive NetMail messages, in addition to the alias\n"
	"    and real name associated with their BBS user account.\n"
	"    This setting defaults to just '`SYSOP`'.\n"
	"\n"
    "`Default Recipient` is the name of the user account you wish to receive\n"
	"    inbound NetMail messages that have been addressed to an unrecognized\n"
	"    user name or alias.\n"
	"\n"
	"`Fuzzy Zone Operation` when set to `Yes`, if SBBSecho receives an inbound\n"
	"    netmail with `NO` international zone information, it will compare the\n"
	"    net/node of the destination to the net/node information in your AKAs\n"
	"    and assume the (source and destination) zone of a matching AKA.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Kill/Ignore Empty NetMail Messages` will instruct SBBSecho to simply\n"
	"    discard (not import or export) NetMail messages without any body.\n"
	"    This setting defaults to `Yes`.\n"
	"\n"
	"`Delete Processed NetMail Messages` will instruct SBBSecho to delete\n"
	"    NetMail messages/files after they have been sent or imported.\n"
	"    When set to `No`, SBBSecho will mark them as Sent or Received instead.\n"
	"    This setting defaults to `Yes`.\n"
	"\n"
	"`Ignore NetMail Destination Address` will instruct SBBSecho to treat\n"
	"    all NetMail as though it is destined for one of your systems's FTN\n"
	"    addresses (AKAs) and potentially import it.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Ignore Netmail 'Sent' Attribute` will instruct SBBSecho to export\n"
	"    NetMail messages even when their 'Sent' attribute flag is set.\n"
	"    This setting `should not` be set to `Yes` when `Delete NetMail` is\n"
	"    disabled.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Ignore Netmail 'KillSent' Attribute` will instruct SBBSecho to ignore\n"
	"    this attribute flag and will `not` delete Sent NetMail.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Ignore Netmail 'Received' Attribute` will instruct SBBSecho to import\n"
	"    NetMail messages even when their 'Received' attribute flag is set.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Ignore NetMail 'Local' Attribute` will instruct SBBSecho to import\n"
	"    NetMail messages even when their 'Local' attribute flag is set.\n"
	"    This setting defaults to `No`.\n"
	"\n"
	"`Maximum Age of Imported NetMail` allows you to optionally set an age\n"
	"    limit of NetMail messages that may be imported.\n"
	"    This setting defaults to `None` (no maximum age).\n"
;
					i=0;
					strListCombine(cfg.sysop_alias_list, sysop_aliases, sizeof(sysop_aliases)-1, ",");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%s", "Sysop Aliases",sysop_aliases);
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%s", "Default Recipient"
						,cfg.default_recipient);
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Fuzzy Zone Operation"
						,cfg.fuzzy_zone ? "Yes":"No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Kill/Ignore Empty NetMail "
						"Messages",cfg.kill_empty_netmail ? "Yes":"No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Delete Processed NetMail"
						,cfg.delete_netmail ? "Yes":"No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail Destination Address"
						,cfg.ignore_netmail_dest_addr ? "Yes" : "No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail 'Sent' Attribute"
						,cfg.ignore_netmail_sent_attr ? "Yes" : "No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail 'KillSent' Attribute"
						,cfg.ignore_netmail_kill_attr ? "Yes" : "No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail 'Received' Attribute"
						,cfg.ignore_netmail_recv_attr ? "Yes" : "No");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%-3.3s","Ignore NetMail 'Local' Attribute"
						,cfg.ignore_netmail_local_attr ? "Yes" : "No");
					if(cfg.max_netmail_age)
						duration_to_vstr(cfg.max_netmail_age, str, sizeof(str));
					else
						SAFECOPY(str, "None");
					snprintf(opt[i++],MAX_OPLN-1,"%-40.40s%s","Maximum Age of Imported NetMail"	, str);
					opt[i][0]=0;
					j=uifc.list(WIN_ACT|WIN_SAV,0,0,0,&netmail_opt,0,"NetMail Settings",opt);
					if(j==-1)
						break;
					switch(j) {
						case 0:
							uifc.helpbuf=
							"~ Sysop Aliases ~\n\n"
							"This is a comma-separated list of additional `To` names that the sysop\n"
							"(user #1) can receive netmail by. When specifying multiple aliases,\n"
							"they must be separated by a single comma and no extra white-space\n"
							"(e.g. \"SYSOP,COORDINATOR\"). The default value is just `SYSOP`.\n";
							if(uifc.input(WIN_MID|WIN_BOT|WIN_SAV,0,0,"Sysop Aliases (comma separated)"
								,sysop_aliases
								,sizeof(sysop_aliases)-1,K_EDIT|K_UPPER) >= 0) {
								strListFree(&cfg.sysop_alias_list);
								cfg.sysop_alias_list = strListSplit(NULL, sysop_aliases, ",");
							}
							break;
						case 1:
							uifc.input(WIN_MID|WIN_SAV,0,0,"Default Recipient"
								,cfg.default_recipient, sizeof(cfg.default_recipient)-1
								,K_EDIT|K_UPPER);
							break;
						case 2:
							k = !cfg.fuzzy_zone;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Fuzzy Zone Operation",uifcYesNoOpts)) {
								case 0:	cfg.fuzzy_zone = true;	break;
								case 1:	cfg.fuzzy_zone = false;	break;
							}
							break;
						case 3:
							k = !cfg.kill_empty_netmail;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Delete Empty NetMail",uifcYesNoOpts)) {
								case 0:	cfg.kill_empty_netmail = true;	break;
								case 1:	cfg.kill_empty_netmail = false;	break;
							}
							break;
						case 4:
							k = !cfg.delete_netmail;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Delete Processed NetMail",uifcYesNoOpts)) {
								case 0:	cfg.delete_netmail = true;	break;
								case 1:	cfg.delete_netmail = false;	break;
							}
							break;
						case 5:
							k = !cfg.ignore_netmail_dest_addr;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Ignore NetMail Destination Address",uifcYesNoOpts)) {
								case 0:	cfg.ignore_netmail_dest_addr = true;	break;
								case 1:	cfg.ignore_netmail_dest_addr = false;	break;
							}
							break;
						case 6:
							k = !cfg.ignore_netmail_sent_attr;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Ignore NetMail 'Sent' Attribute",uifcYesNoOpts)) {
								case 0:	cfg.ignore_netmail_sent_attr = true;	break;
								case 1:	cfg.ignore_netmail_sent_attr = false;	break;
							}
							break;
						case 7:
							k = !cfg.ignore_netmail_kill_attr;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Ignore NetMail 'KillSent' Attribute",uifcYesNoOpts)) {
								case 0:	cfg.ignore_netmail_kill_attr = true;	break;
								case 1:	cfg.ignore_netmail_kill_attr = false;	break;
							}
							break;
						case 8:
							k = !cfg.ignore_netmail_recv_attr;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Ignore NetMail 'Received' Attribute",uifcYesNoOpts)) {
								case 0:	cfg.ignore_netmail_recv_attr = true;	break;
								case 1:	cfg.ignore_netmail_recv_attr = false;	break;
							}
							break;
						case 9:
							k = !cfg.ignore_netmail_local_attr;
							switch(uifc.list(WIN_MID|WIN_SAV,0,0,0,&k,0
								,"Ignore NetMail 'Local' Attribute",uifcYesNoOpts)) {
								case 0:	cfg.ignore_netmail_local_attr = true;	break;
								case 1:	cfg.ignore_netmail_local_attr = false;	break;
							}
							break;
						case 10:
							uifc.helpbuf=
							"~ Maximum Age of Imported NetMail ~\n\n"
							"Maximum age of NetMail that may be imported. The age is based\n"
							"on the date supplied in the message header and may be incorrect in some\n"
							"conditions (e.g. erroneous software or incorrect system date).\n"
							"Set this value to `0` to disable this feature (no maximum age imposed)."
							;
							if(cfg.max_netmail_age)
								duration_to_vstr(cfg.max_netmail_age, str, sizeof(str));
							else
								SAFECOPY(str, "None");
							if(uifc.input(WIN_MID|WIN_BOT|WIN_SAV,0,0,"Maximum NetMail Age"
								,str, 10, K_EDIT) >= 0)
								cfg.max_netmail_age = (ulong)parse_duration(str);
							break;

					}
				}
				break;

			case 4:	/* EchoMail Settings */
				j=0;
				while(1) {
					uifc.helpbuf=
	"~ EchoMail Settings ~\n"
	"\n"
	"`Area Manager` is the BBS user name or alias to notify (via email) of\n"
	"    AreaMgr activities and errors.  This setting defaults to `SYSOP`.\n"