Still using BOOL where we need Win32 API compatibility.
Using JSBool instead of BOOL or bool where it matters.
Changed most relevant TRUE/FALSE to true/false too (though it's not as critical).

You shouldn't need to #include <stdbool.h> anywhere now - gen_defs.h should do that automatically/correctly based on the language/version/tool. In C23, stdbool.h isn't even needed for bool/true/false definitions (they're keywords), so we don't bother including stdbool.h in that case.
Microsoft didn't define __STDC_VERSION__ in their older tool chains (even though they were C99 compatible and had stdbool.h), so we use a _MSC_VER check to know that there's a stdbool.h we should use in that case.

For other/old compilers (e.g. Borland C) we #define bool/true/false following the pattern of stdbool.h (doesn't use a typedef).

I didn't convert UIFC yet.

This addresses issue #698

So Clang-FreeBSD was warning (in compiles of scfg/scfg*.c by Deuce):
result of comparison of constant 100000 with expression of type 'uint16_t'
(aka 'unsigned short') is always true

Why? Cause a uint16_t's max value is 65535 (less than 100000). Sure we could
have just lowered the UIFC max number of config items to 65535, but that would
have been too easy. And why are these compared-with values of type uint16_t to
begin with? Because most ctrl/*.cnf lists (of configuration items) were
limited to 65535 entries cause ... 16-bit DOS, historically. Now that *.cnf
files aren't used, we could just increase these scfg_t.*_total type sizes from
16 to 32-bits, yeah? The result is this commit.

I went to (signed) int so we could still keep -1 as the special illegal
sub/dir num value (e.g. INVALID_SUB, which is sometimes used to indicate the
email message base). Theoretically, 2 billion configuration items could be
supported in these lists, but SCFG will limit you to 100000 anyway. So there's
a whole lot of s/uint/int in this commit.

I'd be very surprised if this doesn't result in some new GCC/Clang warnings,
but at least the old "comparison of constant 100000" warnings are now gone!

Does exactly the same thing, no change in behavior and unlikely there's any change in performance.

Handles integer overflow in the summing of user's credits and remaining daily
free credits.

Caught by a GCC warning.

Upon successful download of a file, recalculate and store the user's download CPS (characters/bytes per second), mainly for subsequent transfer time estimates.

If a file gets added to a batch download queue that a user doesn't have download-access to (at the time of batch download), deal with that gracefully and consistently.

start_batch_download():
- Now checks current user access to download the file in both single-file and batch modes
- Now performs credit-check in single-file mode (wasn't doing so previously)
- totalsize of multi-file batch download queue is now calculated again (apparently removed/broken in the new filebase conversion of v3.19), so download ETA should be calculated more accurately (?) again
- Use gettimetodl() to calculate each file's download time for multi-file downloads
- Using new putnode_download() method to write node downloading "action" and ETA-in-aux fields
- The node status wasn't being updated at all before start of download in single-file mode - fixed

create_batchdn_lst() :
- Checks each file still downloadable by the user and if not, removes from the queue (and the generated list file).
- Performs credit check and removes files that exceed available user credit
- returns true only when 1 or more files is added to the batch download list file

addtobatdl()
- Removed redundant 'D' restriction check - this is handled by can_user_download() check already.
- Use the 'reason' out parameter from can_user_download() to determine which error string to display (not always CantDownloadFromDir).

You want to replace the built-in batch file transfer menu with your own
loadable module across all command shells? Now you can.

This fixes issue #516

Oversight probably during the new filebase overhaul in v3.19. Reported by Nelgin.

Upload and Download ARS must be matched *and* the directory's upload and download ARS.

Operator and Exemption ARS must be matched *or* the directory's operator and exemption ARS.

Now, if the BOOL argument value is FALSE, then the .ini file is opened read-only (and thus only read permissions are needed, resolving issue #455).

If the BOOL argument value is TRUE, create-if-not-exist is implied. There are no use cases where we would want to open an .ini file for writing only if it already existed.

This insures that the 'R'emove file option will work correctly if when displayed sorted.

Credits and daily free credits are accurate to the byte up to (a maximum) of 18446744073709551615 (that's 18 Exbibytes - 1).

User's upload and download byte stats are now similarly extended in maximum range, but the accuracy is only "to the byte" for values less than 10,000,000,000. Beyond that value, the accuracy declines, but is generally pretty damn accurate (to 4 decimal places beyond the nearest multiple of a power of 1024), so I don't expect that to be an issue. This method of storing upload/download byte stats allowed me to use the same 10-character user record fields in the user.dat file.

As a side-effect of this enhancements:
* User and file credit values are now expressed in multiples of powers of 1024 (e.g. 4.0G rather than 4,294,967,296).
* Free credits per day per security level has now been extended from 32 to 64-bits (to accommodate values >= 4GB).
* adjustuserrec() now longer takes the record length since we can easily determine that automatically and don't need more "sources of truth" that can be out-of-sync (e.g. the U_CDT field length going from 10 to 20 chars with this change).
* setting the stage for locale-dependent thousands-separators (e.g. space instead of comma) - currently still hard-coded to comma
* more/better support for files > 4GB in size (e.g. in the batch download queue)
* user_t ulong fields changed to either uint32_t or uint64_t - I didn't realize how many long/ulong's remained in the code (which are sometmies 32-bit, sometimes 64-bit) - ugh
* Steve's ultoac() function renamed to u32toac() and created a C++ wrapper that still uses the old name, for homage

To fully support files > 4GB in size in file bases, credit values larger than 32-bits must be supported too.

There's a couple of todo comments/items included in this commit, but that's mainly to do with messages (which don't really have costs anyway).

The main thing to deal with now is the fact that users can't have more than 4GB in credits in the first place! That's got to be fixed next.

CID 330961

Testable File Types and Download Events support working strings (display before/while the command-line executes). Clear the current line (displaying this working string) when the execution completes.

This fixes issue #328.

The user actually *can* remove files from the batch queues in v3.19b, but you have to type the filenames which is not obvious from the prompt which implies you need to type the file index position (e.g. '1' for the first file in the queue). In all Synchronet versions prior, you could only remove by number (and not by name).

The fix is to allow either the number or the name of the file to be entered at the RemoveWhich prompt and the file is removed from the queue successfully.

Thanks Ragnarok!

Default the progress time interval to 500 milliseconds (twice a second).

Don't specify a count/call interval in the call-sites, since we really want to use time-based progress updates now only and the default probably will work fine everywhere.

The internal line editor's quoting feature add some hard-coded strings ("Done" and "All") and the (L)ist key was hard-coded. Use the text.dat string (new and pre-existing) for these now.

Also, use the new sbbs_t *_key() methods for referencing the configured key bindings (via text.dat) for these common key-stroke commands.
Convert the text.dat strings for keys (e.g. YNQP) to uppercase always as well.

When there's no "uploads" directory configured by the sysop, cfg.upload_dir will be set to INVALID_DIR, which cannot be used as an index into cfg.dir[] to determine if the time used for uploading the files should be "given back" to the user.

In v3.18, we used the first file in the upload queue, if there was one, else fell back to the "uploads" dir (which had to have been defined if there were no files in the queue). So this illegal array indexing was a regression in v3.19.

Reported by Zoltán Gábor on Facebook

Not that it really matters, but perhaps it'll matter in the future. And the code reads better.

The BadFilename text.dat is now a format string (prints the bad filename).
Use the nice progress() display status while searching for duplicate filenames.

This won't impact Synchronet as it has a separate signal handling
thread, but we still need to behave properly for processes that
don't.  I'm also saying that ENOMEM does not indicate a disconnection,
though it may be better to pretend it was disconnected...

- Move files from temp directory to uploads directory *before* determining what the short filename is going to be (since the underlying file system can change the short filename during that process). This should resovle the issue of blind-uploading multiple files with long filenames that begin with the same prefix of 6-8 characters.
- Batch upload queue processing wasn't touched as part of this change. That logic probably also could use a similar fix.

this code is on the chopping block already.

conditions) - e.g. if a malloc or realloc failed, then some other allocated
memory would be leaked.

If a filename had no extension, it could not be added via batch download
list since this code was truncating all white-space off each line read.
Now it will just truncate end-of-line characters.

was never used. This was intended to be a method for internationalization,
letting the sysop change which key is used as the uiniversal "quit" key.
This commit replaces most of the uses of the hard-coded 'Q' for quit wtih the
3rd charcter in the text.dat YNQP string. Some hard-coded menus still have the
'Q' key hard-coded and will need to be addressed later. The text.h YN index
macro was changed to YNQP and the JS text index variable name will change
as well.

That is, if any of the following text.dat entries are set to a blank/emtpy
string (by editing ctrl/text.dat or via run-time script modification), the
question will not be asked of the user allowing greater sysop-customization
of hard-coded processes (e.g. new user application):
ClearUploadQueueQ
ClearDownloadQueueQ
HangUpAfterXferQ
ChatWithGuruInsteadQ
ForwardMailQ
DownloadBatchQ
LogOffQ
DeleteErrorLogQ
ClearErrCounter
DeleteGuruLogQ
AutoTerminalQ
AnsiTerminalQ
ColorTerminalQ
ExAsciiTerminalQ
CallingFromNorthAmericaQ
ReadYourMailNowQ
NScanAllGrpsQ
SScanAllGrpsQ
NewPasswordQ
ContinueQ
EnterYourPhoneNumber
UserInfoCorrectQ
UseExternalEditorQ
DownloadAttachedFileQ
AddSubToNewScanQ (new)
RemoveFromNewScanQ
DisplaySubjectsOnlyQ
Post
SearchExtendedQ
ViewSysInfoFileQ
ViewLogonMsgQ
WithLineNumbersQ

Added HOST and IP keywords to allow restricted access/privileges to/for
specific remote hostnames or IP addresses (wildcards allowed).
All string-argument type ARS keywords (e.g. SHELL, PROT, etc.) now support .can
style wildcards.
The current remote client is now used for protocol, host, and IP ARS checking,
when available, so this requires passing the client pointer around (which
explains why so many files are touched by this change) and takes care of a
long standing to-do item (the user's 'modem' value was used for the PROT
value checking, which was not always correct).

(e.g. with SEXYZ or RZ), then it would not be properly added to the database
(but the file would be copied to the destination directory).